80S-2080F480F4-680F5 User’s Manual.pdf - 第140页
SIPLACE 80S- 20/F4/F4-6 User’s Manual 3 Placement Functions Edition 07/97 from Software Version SR.403.xx 3.2 Set-Up 3 - 11 If the bar code co mpariso n shows agr eement and th e track is empty, c lick on the Refill trac…
3 Placement Functions SIPLACE 80S-20/F4/F4-6 User’s Manual
3.2 Set-Up Edition 07/97 from Software Version SR.403.xx
3 - 10
3.2.2.1 Acceptable bar codes
Click on the Acceptable bar codes button. A list of possible bar codes will be displayed in a selection
box. Currently a maximum of 6 different bar codes can be entered.
Fig. 3.2.5 Acceptable bar codes
- Key to Fig. 3.2.5
1 Marking for filter in the bar code 2 Acceptable bar code
3 Selection box with a maximum of 6 barcodes
NOTE :
If a position in the bar code is occupied by a filter (occupied with a star
¤), this position will not be included in
evaluation. This can be used for excluding data contained in the bar code (for example, date, company and so
on).
Read in the component bar code (see also Section 11.4).
The bar code which has been read is compared with the bar code required. Preset filters will not be
included in the comparison process.
The results of the bar code comparison will be displayed in the Bar code comparison display win-
dow.
Check the results:
Same: The bar codes are identical.
Not the same: The bar codes are not identical.
1 2 3
SIPLACE 80S-20/F4/F4-6 User’s Manual 3 Placement Functions
Edition 07/97 from Software Version SR.403.xx 3.2 Set-Up
3 - 11
If the bar code comparison shows agreement and the track is empty, click on the Refill track button or
read in the return bar code on the track bar code strip.
3.2.2.2 Manual input
If the component bar code cannot be read in from the reel, you can enter the bar code by hand.
Click on the Manual input button to enter the bar code by hand.
Fig. 3.2.6 Manual input
Read off the bar code from the components reel and enter this bar code into the input field. Press the
OK button to confirm.
The read-in bar code is compared with the bar code actually required. During this comparison, preset
filters are ignored.
The results of the bar code comparison will be displayed in the Bar code comparison display win-
dow.
Check the results:
Same: The bar codes are identical.
Not the same: The bar codes are not identical.
If the bar code comparison shows agreement and the track is empty, click on the Refill track button or
read in the return bar code on the track bar code strip.
3 Placement Functions SIPLACE 80S-20/F4/F4-6 User’s Manual
3.2 Set-Up Edition 07/97 from Software Version SR.403.xx
3 - 12