80S-2080F480F4-680F5 User’s Manual.pdf - 第544页

SIPLACE 80S-20/F4/F4-6/F5 User’s Manual 9 Maintenance Edition 03/98 from S oftware Version SR.404.xx 9.8 Wafflepack Changer 9 - 95 - Key to Fig. 9.8 .3 1 Holdin g plate for trays 2 Gui de rail f or car riage 3 Machi ne s…

100%1 / 744
9 Maintenance SIPLACE 80S-20/F4/F4-6/F5 User’s Manual
9.8 Wafflepack Changer Edition 03/98 from Software Version SR.404.xx
9 - 94
Fig. 9.8.3 Maintenance of the guide rails and z-lift axis of the wafflepack changer
SIPLACE 80S-20/F4/F4-6/F5 User’s Manual 9 Maintenance
Edition 03/98 from Software Version SR.404.xx 9.8 Wafflepack Changer
9 - 95
- Key to Fig. 9.8.3
1 Holding plate for trays
2 Guide rail for carriage
3 Machine spirit level
4 Guide rail for tray rest
5 Reference fiducials
6 Guide rails of the z-lift axis
7 Lubrication nipple for lift axis
8 Lift / lower
9.8.6 Concluding Work
Replace the wafflepack changer back in the machine using the lifting device as described in the Section
Components supply.
Check next the spirit level on the wafflepack changer.
If necessary slide the trays including magazines back into the correct track.
Make sure that the trays have been restored in their correct places.
NOTE
When you refit the trays, note that magazine No. 1 must be replaced in its previous rotational position in
track 1 ( magazine 2 in track 2, and so on). If you do not do this, when you begin placement again there
will be an undefined state which can lead to errors in picking up components from the wafflepack changer.
For this reason it is not enough simply to check only the component allocations to the tracks of the waf-
flepack changer with the help of the ACTUAL display of the wafflepack changer set-up in the Single
functions menu.
Plug the interface and power supply plugs back into the machine base.
After the start of a placement program which also picks up components from the wafflepack changer, the
PCB camera will travel automatically over the fiducial on the wafflepack changer and registers its position.
9 Maintenance SIPLACE 80S-20/F4/F4-6/F5 User’s Manual
9.8 Wafflepack Changer Edition 03/98 from Software Version SR.404.xx
9 - 96