80S-2080F480F4-680F5 User’s Manual.pdf - 第568页
SIPLACE 80 S20/F4/F4-6/F5 User’s Manual 10 Component Handling Edition 03/98 from S oftware Version S R.404.xx 10.4 E mpty Tape Cutter on SIPLAC E 80S-20/F4/F4-6 Automatic Placement Mac hines 10 - 15 10.4 Empty Tape Cutte…
10 Component Handling SIPLACE 80 S20/F4/F4-6/F5 User’s Manual
10.3 Component Tables Edition 03/98 from Software Version SR.404.xx
10 - 14
SIPLACE 80 S20/F4/F4-6/F5 User’s Manual 10 Component Handling
Edition 03/98 from Software Version SR.404.xx 10.4 Empty Tape Cutter on SIPLACE 80S-20/F4/F4-6 Automatic Placement Machines
10 - 15
10.4 Empty Tape Cutter on SIPLACE 80S-20/F
4
/F
4
-6
Automatic Placement Machines
10.4.1 General
The SIPLACE 80S-20/F
4
automatic placement system is equipped with an empty tape cutter at the installa-
tion locations for the two component tables. The empty tape cutter cuts up the waste tape.
The cut pieces of tape drop into the tape container beneath the component table.
Empty the tape container on a daily basis.
Fig. 10.4.1 Tape cutter
- Key to Fig. 10.4.1
1 Cutter wheel 2 Toothed belt for cutter wheel
3 Cutting edge 4 Drive belt
5 Drive motor
10 Component Handling SIPLACE 80 S20/F4/F4-6/F5 User’s Manual
10.4 Empty Tape Cutter on SIPLACE 80S-20/F4/F4-6 Automatic Placement MachinesEdition 03/98 from Software Version SR.404.xx
10 - 16
10.4.2 Inserting the Tape into the Tape Cutter
PLEASE NOTE
On SIPLACE 80S-20/F
4
automatic placement systems, only use the tape feeder modules specified for these
machines. The used tape channel which removes the used tape is located upstream of the feeder modules.
Insert the tape into the feeder as described in the corresponding section.
Guide the used tape into the used tape channel of the cutter as described in Fig. 10.4.2
Fig. 10.4.2 Inserting the tape into the tape cutter
- Key to Fig. 10.4.2
1 Used tape channel 2 Used tape
3 Tape feeder module 4 To tape cutter