80S-2080F480F4-680F5 User’s Manual.pdf - 第429页

7 Error Information & Diagnostics SIPLACE 80S-20/F4/F4-6 User’s Manual 7.2 Diagnostics Edition 03/98 from Software Version SR.403.xx 7 - 14 ● Diagnosi s of an error without error message By cli cking on t his button …

100%1 / 744
SIPLACE 80S-20/F4/F4-6 User’s Manual 7 Error Information & Diagnostics
Edition 03/98 from Software Version SR.403.xx 7.2 Diagnostics
7 - 13
7.2.2.2 Diagnostics Buttons
You can select one of three different ways of starting the diagnostics facility.
● Diagnostics with automatic takeover of the error message
By clicking on this button you can start diagnostics for the errors displayed in the status line.
● Diagnostics with manual input of the error message
● Click on this button.
● Into the input field type the error number for which you wish to start diagnostics and confirm this with
Enter.
Fig. 7.2.4 Diagnostics with manual input of the error message
- Key to Fig. 7.2.4
1 Input field
1
7 Error Information & Diagnostics SIPLACE 80S-20/F4/F4-6 User’s Manual
7.2 Diagnostics Edition 03/98 from Software Version SR.403.xx
7 - 14
● Diagnosis of an error without error message
By clicking on this button you can start diagnostics for errors for which there is no error message, such as
reduced placement performance, poor placement quality and so on.
Fig. 7.2.5 Diagnosis of an error without error message
SIPLACE 80S-20/F4/F4-6 User’s Manual 7 Error Information & Diagnostics
Edition 03/98 from Software Version SR.403.xx 7.2 Diagnostics
7 - 15
7.2.3 Procedure
NOTE
The procedure is explained with the help of an example which uses Diagnostics with automatic take-over
of error message. The procedure is identical for all diagnostic methods and error messages.
If an error occurs, the error message will be displayed on the status line in the main view.
(See Fig. 7.2.1).
● Click on the Diagnostics button.
● Click on the Diagnostics with automatic take-over of error message button.
● Click on the Information button; read and comply with this information.
NOTE
Always read and comply with the information when an Information button appears.
Fig. 7.2.6 Obtaining information on an error