80S-2080F480F4-680F5 User’s Manual.pdf - 第215页

4 Single Functi ons SIPLACE 80S-20/F4/F4-6 User’s Manual 4.4 Single Functions: Transport 1 Edition 07/97 from Software Version SR.403.xx 4 - 50 4.4.2.2 Adjusting the Width Click o n the High s peed check box. If the chec…

SIPLACE 80S-20/F4/F4-6 User’s Manual 4 Single Functions

Edition 07/97 from Software Version SR.403.xx 4.4 Single Functions: Transport 1

4 - 49

4.4.2 Conveyor Width

It will be necessary to alter the width of the conveyor when a different board size is introduced or during vari-

ous types of maintenance work.

In the PCB transport screen click on the Conveyor width button.

Fig. 4.4.3 Conveyor width

CAUTION

Before adjusting the conveyor width make sure that there are no boards or other objects on the machine’s

conveyors. Failure to do so may result in damage to the machine and board.

4.4.2.1 PCB Transport Width- Measure Width

Within the working area click on the Measure width button . The width of the board conveyor is measured,

displayed and saved.

4 Single Functions SIPLACE 80S-20/F4/F4-6 User’s Manual

4.4 Single Functions: Transport 1 Edition 07/97 from Software Version SR.403.xx

4 - 50

4.4.2.2 Adjusting the Width

Click on the High speed check box.

If the check box has been activated, clicking on the Larger button will cause the conveyor belts to be

moved apart at high speed.

If the check box has been deactivated, clicking on the Larger button will cause the conveyor belts to be

moved apart at low speed.

If the check box has been activated, clicking on the Smaller button will cause the conveyor belts to be

moved together at high speed.

If the check box has been deactivated, clicking on the Smaller button will cause the conveyor belts to be

moved together at low speed.

NOTE

Once width adjustment has been completed and upon quitting Single functions, the left-hand gantry will carry

out a search run in order to determine the width of the conveyor.

SIPLACE 80S-20/F4/F4-6 User’s Manual 4 Single Functions

Edition 07/97 from Software Version SR.403.xx 4.5 Single Functions: Transport 2 (Option)

4 - 51

4.5 Single Functions: Transport 2 (Option)

The single function Transport 2 will not be active unless the option Twin conveyor has been physically

installed and activated. See Chapter 11.10 of this user’s manual too.

Click on the icon for Single functions - Transport 2 in the main view.

Fig. 4.5.1 Single functions - conveyor 2

All of the functions in this menu are identical to the functions described in 4.4 'Single Functions: Transport 1'.