80S-2080F480F4-680F5 User’s Manual.pdf - 第619页

11 Station Extensions/Options SIPLACE 80S-20/F4/F4-6/F5 User’s M anual 11.4 Component Barcode Edition 03/98 from Software Version SR.404.xx 11 - 22 l Track occupa ncy For track occup ancy, blac k sheet steel pl ates with…

SIPLACE 80S-20/F4/F4-6/F5 User’s Manual 11 Station Extensions/Options

Edition 03/98 from Software Version SR.404.xx 11.4 Component Barcode

11 - 21

11.4 Component Barcode

11.4.1 General Information

The SIPLACE 80S-20/F

-6/F

placement machine allows you to make sure track occupancy is correct by

means of a barcode reader and to read component data from, for example, component reels.

The barcodes are read in using a barcode reader connected to the station computer.

Fig. 11.4.1 Component barcode reader connected to the Siplace machine

- Key to Fig. 11.4.1

1 Barcode reader 2 Holder for barcode reader

11 Station Extensions/Options SIPLACE 80S-20/F4/F4-6/F5 User’s Manual

11.4 Component Barcode Edition 03/98 from Software Version SR.404.xx

11 - 22

l Track occupancy

For track occupancy, black sheet steel plates with four-place barcode strips are fitted on the lateral protec-

tive panels. The first place is used for identifying the component table (1 or 2) while the remaining three

places specify the track numbers. Return barcodes are provided at each end of the label. These have the

same function as the Return key on the keyboard. These barcode strips are numbered consecutively in

increments of two (1, 3, 5, 7 and so on) and apply in each case to 2 tracks (for example, bar code 1 =

tracks 1 and 2).

l Components

In order to compare, for example, the stock of components with the numbers required by the set-up file

(refill check), data can be read off the component reels.

You will hear an acoustic signal each time a data record is read in successfully.

NOTE

The Components barcode reader option must be configured in the line computer.

NOTE

Bar codes which begin with the number 1 or 2 and are 4 characters long are interpreted as track barcodes. All

other bar codes which begin with the number 1 or 2 are interpreted as component barcodes.

SIPLACE 80S-20/F4/F4-6/F5 User’s Manual 11 Station Extensions/Options

Edition 03/98 from Software Version SR.404.xx 11.4 Component Barcode

11 - 23

11.4.2 Notes on Operating

- The barcode reader has to be connected to the station computer.

- The bar code must be keyed in at the line computer for the component in question.

Activate the "Set-up check with barcode“ function from the Machine options menu.

Fig. 11.4.2 Set-up check with barcode

NOTE

If a place in the bar code is occupied by a filter (using an asterisk *) this place will not be evaluated. This facil-

ity can be used for filtering out unwanted data contained in the bar code (such as date, company name, and

so on).

- If the component barcode is set at the line computer and in the station the „Component verification with

barcode“ has been switched in via the machine options:

it will not be possible to manually „Refill location“ or „Refill track with barcode“.

- In the case of tracks with a component without barcode, it will be possible to „Refill“ manually despite the

refill check having been activated.