2OM-1733-005w_F8.pdf - 第102页

2OM-1733 1-4-26 4.2.7 T ape Pocket Recog This function recognizes the edge area (outline) of a pocket, determines its center, and feed it back to the feeder (B) offset data. [6] [2] [3] [4] [5] [8] [9] [10] [11] [12] [13…

2OM-1733

1-4-25

[4] Fdr In/Out

"Enable" or "Disable" can be selected to determine whether or not the feeder

offset (B) data should be cleared automatically when the feeder is installed

or uninstalled.

Fdr Offset (B) Auto Clear

Disable

Select this button not to clear the feeder offset (B) data automatically when

the feeder is installed or uninstalled.

Enable

Select this button to clear the feeder offset (B) data automatically when the

feeder is installed or uninstalled.

[5] Start with installed Fdr only

Disable

When pressed, automatic operation with installed feeder only is available.

Enable

When pressed, automatic operation with installed feeder only is disabled.

[6] In-use Fdr in/out

Disable

This button is selected when the "in-use feeder in/out" function is not used.

Enable

This button is selected when "in-use feeder in/out" function is used.

1204-001

4.2 "Opr.Mode" Tab Sheet

2OM-1733

1-4-26

4.2.7 Tape Pocket Recog

This function recognizes the edge area (outline) of a pocket, determines its center,

and feed it back to the feeder (B) offset data.

[6]

[2]

[3]

[4]

[5]

[8]

[9]

[10]

[11]

[12]

[13]

[15]

[7]

[1]

Fig. 2A4-16 "Tape Pocket Recog" Tab Sheet (1/2)

[15]

[14]

Fig. 2A4-17 "Tape Pocket Recog" Tab Sheet (2/2)

Note

(a) This function can be used for the components (size: 2012 or less) packaged

in a paper tape.

(b) In the case that the actual component size is out of the range of

25% of the

component size set in the component library, the "Machine Information"

window appears.

1212-002

4.2 "Opr.Mode" Tab Sheet

2OM-1733

1-4-27

[1] Func Set

"Enable" or "Disable" can be selected to determine whether or not the

automatic teaching function should be used for the feeder pocket recognition.

[Disable] Button

Select this button not to use the automatic teaching function for the feeder

pocket recognition.

[Enable] Button

Select this button to use the automatic teaching function for the feeder pocket

recognition.

When the [Enable] button is selected for "Func Set" (automatic teaching

of feeder pocket recognition) in the "Tape Pocket Recog" group box, the

following buttons become available.

[2] Interval

When this button is pressed, the "Interval" window opens, enabling you

to specify the number of automatic teaching operations to be performed

periodically according to the number of tape feeding times for the feeder

pocket recognition.

[3] On Handling Err

One of the following buttons can be selected to determine whether or not

an automatic teaching operation should be performed on the feeder pocket

recognition after a pickup error has occurred.

Disable

Select this button not to perform an automatic teaching operation on the

feeder pocket recognition after a pickup error has occurred.

Enable

Select this button to perform an automatic teaching operation on the feeder

pocket recognition after a pickup error has occurred.

Note

This function is not available unless the "On Handling Err (Recog Time)"

is set to "1" or more.

[4] On Handling Err (Recog Time)

Set the feeder pocket recognition times when the "On Handling Err" has

been set to "Enable".

1204-001

4.2 "Opr.Mode" Tab Sheet