2OM-1733-005w_F8.pdf - 第69页
2OM-1733 1-2-9 2.2 Line Window This window enables the operator to check the production line operation status and operate the line. In this window, the operation status of the SIGMA series machines (including the printer…
2OM-1733
1-2-8
[5] Stop Mode
[All PCB out] Button
After the PCB in the course of the production, has been produced, the PCB is
discharged and the automatic production operation is stopped.
[Cycle] Button
When the component placement operations on the PCBs in the course of
the production in each of the stage 1 and stage 2, have been completed, the
automatic production operation is stopped.
1212-001
2.1 Local Window
2OM-1733
1-2-9
2.2 Line Window
This window enables the operator to check the production line operation status
and operate the line.
In this window, the operation status of the SIGMA series machines (including
the printer) set in the line conguration, PCB transfer unit graphic image and
production data are displayed.
[1]
[6]
[5]
[7]
[3]
[4]
[5]
[2]
F2A2-9
[1] [Local] / [Line] Change Buttons
Using these buttons, the Local window is changed to or from the Line
window.
[2] No.
In this area, the machine Nos. in the line are displayed.
[3] Operation Status
In this area, the operation status of each machine in the line, is displayed.
RUN
: This machine is under operation.
STOP
: This machine is shut down.
PAUSE
: This machine is stopped temporarily.
[4] PCB transfer section
In this area, the operation status of each machine in the line, is displayed.
Green
: PCB present
Gray
: PCB absent
[5] Feeder Base Unit
In this area, the presence or absence of the feeder base is displayed.
Graphic
Development
1212-002
2.2 Line Window
2OM-1733
1-2-10
[6] Line Ctrl
[Start] Button
When this button is pressed and the [Start] button on the operation panel
is pressed, the machines (including the printer) in the line, are started up
together.
Note
(a) The start-up operation is available from any machine in the line.
(b) Press the start button after all the machines to be operated have been
set to production READY condition.
When any of the machines has not been set to production READY
condition, the start-up together is not available.
(c) When the machines are started up together, the tower light ashes for
three seconds and the buzzer sounds.
[Product] Button
When this button is pressed and the [Start] button on the operation panel is
pressed, the PCB is discharged from any machine (including the printer) in
the line.
Note
The start-up operation is available from any machine in the line.
[7] Production Data
The production data for the SIGMA Series line is displayed in this area.
Prod PCB
The currently produced PCB count is displayed in this data box.
Process time
The production nish time is displayed in this data box.
Rate of err [%]
The pick-up error rate based on the quantity of produced PCBs, is
displayed in this data box.
1212-003
2.2 Line Window