2OM-1733-005w_F8.pdf - 第150页
2OM-1733 2-3-16 (C02) Mark When the [Mark] button is pressed in the "Operation" window, the following window appears. Fig. 2B3-19 Note The number of pages varies depending on the number of Mark Nos. to be used.…
2OM-1733
2-3-15
(C01_05)
Zones 1, 2, 3, 4, and 5
When the PEC recognition mode is set with "All" function enabled, the
coordinates and mark code of each ducial mark must be set.
1st Point X [mm] (Horizontal) and Y [mm] (Vertical)
Set the coordinates of the rst ducial mark in the text boxes.
1st Point Mark Code
Set the mark code of the rst ducial mark in this text box.
2nd Point X [mm] (Horizontal) and Y [mm] (Vertical)
Set the coordinates of the second ducial mark in the text boxes.
2nd Point Mark Code
Set the mark code of the second ducial mark in the text box.
3rd Point X [mm] (Horizontal) and Y [mm] (Vertical)
Set the coordinates of the third ducial mark in the text boxes.
3rd Point Mark Code
Set the mark code of the third ducial mark in the text box.
Reference
Refer to "(C02) PEC Recognition Mark Data" for the mark codes.
1204-001
3.3 Operation
2OM-1733
2-3-16
(C02) Mark
When the [Mark] button is pressed in the "Operation" window, the following
window appears.
Fig. 2B3-19
Note
The number of pages varies depending on the number of Mark Nos. to be used.
Graphic
Development
1212-002
3.3 Operation
2OM-1733
2-3-17
(C02_01)
Mark No.
The mark Nos. correspond to the mark codes and the specied parameters of
each ducial mark used in the PEC recognition function. 10 types of mark
codes can be registered for each pattern program.
(C02_02)
Mark Type
The following options can be selected as shapes of ducial marks.
Table 2B3-1
Mark Type Shape
Round
Square
Equilateral Triangle (Up)
Cross
Rectangle
Checker (Square)
Diamond
Equilateral Triangle (Down)
Bow Tie
Checker (Rectangle)
Table 2B3-2
Mark Type Shape Mark Type Shape
Through Hole / No Land
Pad Mark / No Land
Through Hole / No Land (E) Pad Mark / No Land (E)
Through Hole / No Land (SE) Pad Mark / No Land (SE)
Through Hole / No Land (S) Pad Mark / No Land (S)
Through Hole / No Land (SW) Pad Mark / No Land (SW)
Through Hole / No Land (W) Pad Mark / No Land (W)
Through Hole / No Land (NW) Pad Mark / No Land (NW)
Through Hole / No Land (N) Pad Mark / No Land (N)
Through Hole / No Land (NE) Pad Mark / Land (NE)
POP Round land
Note
The POP round land cannot be specied as a normal ducial mark.
1212-002
3.3 Operation