2OM-1733-005w_F8.pdf - 第174页
2OM-1733 2-3-40 (E02) Nozzle Stk 1 1, 12, 21, 22 When the [Nozzle Stk 11], [Nozzle Stk 12], [Nozzle Stk 21] or [Nozzle Stk 22] tab is pressed on the "PL Head/Nozzle" window, the following tab sheet appears. Fig…
2OM-1733
2-3-391212-002
3.5 PL Head/Nozzle
3.5 PL Head/Nozzle
(E01) Nozzle Place
When the [Nozzle Place] tab is pressed in the "PL Head/Nozzle" window,
the following tab sheet appears.
Fig. 2B3-33
(E01_01) Nozzle Place
Head 11, 12, 21, 22
Nozzle No. 1 to 15
This data is used to allocate the nozzles to the specied positions (Nozzle
Allocation Nos.) on the heads.
Graphic
Development
2OM-1733
2-3-40
(E02) Nozzle Stk 11, 12, 21, 22
When the [Nozzle Stk 11], [Nozzle Stk 12], [Nozzle Stk 21] or [Nozzle Stk
22] tab is pressed on the "PL Head/Nozzle" window, the following tab sheet
appears.
Fig. 2B3-34
(E02_01) Nozzle Stk 11, 12, 21, 22
Address Stk Types 1 to 15
Using these parameters, the nozzles are housed in the specied positions
(address stocker type) in the nozzle stocker.
High
: 1 to 15
Graphic
Development
1212-002
3.5 PL Head/Nozzle
2OM-1733
2-3-41
3.6 CMPNT PL
(F01) CMPNT PL Data
When the [Block 1] or [Block 2] tab is pressed on the "CMPNT PL Data"
window, the following tab sheet appears.
Fig. 2B3-35
(F01_01)
Fdr No.
Shown are the feeder Nos. in the placement feeder location data.
Block 1
: 101 to 150
Block 2
: 201 to 250
(F01_02)
Component ID
Set component IDs in the text boxes.
Graphic
Development
1212-002
3.6 CMPNT PL