2OM-1733-005w_F8.pdf - 第336页
2OM-1733 6-7-18 7.3 "PEC RCG" T est Window This window enables the operator to perform the PEC recognition mark recognition test. [1] [2] [3] [4] [5] [6] [7] [9] [10] [8] [11] Fig. 2F7-13 [1] [Select block] But…
2OM-1733
6-7-17
Deleting the Teach Data (All Teach Data Delete)
Press the [No] button in the "Conrmation to Saving" window ("Would you
like to save the data registered temporarily to the pattern program? (If the
data has not temporal registration, the teaching result cannot be saved)").
1212-001
7.2 "Place Pos Teach" Window
2OM-1733
6-7-18
7.3 "PEC RCG" Test Window
This window enables the operator to perform the PEC recognition mark
recognition test.
[1]
[2]
[3] [4]
[5]
[6]
[7]
[9]
[10]
[8]
[11]
Fig. 2F7-13
[1] [Select block] Button
The buttons showing each block are displayed using images. Using one of
these buttons, the block used for the PEC recognition test is selected.
[2] [Crnt. PP. Set Data] Button
When this button is pressed, the [Set Data (Crnt. PP.)] window appears.
Fig. 2F7-14
When [Zone n] is selected for the "Zone Choice" for the global recognition
position and the [#n] button is selected and then the [OK] button is pressed,
the position data and PEC recognition mark code are set.
The set data is displayed in the Mark Pos X, Y data boxes in the "Setup Pos
Move" window and "Recognized Data Setting" window.
1212-001
7.3 "PEC RCG" Test Window
Graphic
Development
2OM-1733
6-7-19
[3] [Mark Pos Edit] Button
Using this button, the PEC recognition mark position is setup.
Each item is shows as a button and when each button is pressed, the
corresponding data set window appears.
Fig. 2F7-15
Note
(a) When the pattern program has been setup, the parameters for the [PEC Size
X[mm]], [PEC Size Y[mm]] and [Y arrange Pos] are automatically
set.
(b) When the settings have been performed in the "Cmt PP Data Setting"
window, the [Mrk Pos X[mm]] and [Mark Pos Y[mm]] also have already
been setup.
[4] [Mark Data Edit] Button
Press each button to set the PEC recognition mark.
Fig. 2F7-16
Note
When the settings have been performed in the "Cmt PP Data Setting"
window, the PEC recognition mark data has already been setup
1212-001
7.3 "PEC RCG" Test Window