2OM-1733-005w_F8.pdf - 第298页
2OM-1733 6-4-8 4.2 "Stkr .Area Edit" Window [1] [2] [3] [4] [5] [6] [7] Fig. 2F4-9 [1] PCB Support Pin Position Display Pane The backup table is displayed as an image in this pane. The arrangement condition of …
2OM-1733
6-4-7
4.1.1 Notes on Attachment / Detachment of PCB Support Pins
Notice
Be sure to insert the PCB support pins at right angles.
•
When a PCB support pin is inserted at the bottom side of the chute, it
may collide with the backup table while the backup table is moving up.
•
If the pins are inserted improperly, the machine will break down.
Chute
PCB
Previously Placed
Component
Chute
PCB Support Pin
Backup Table
Collision!
Backup Table Up Movement
Improper Pin Insertion
Fig. 2F4-7
Collision!
Foreign Substance on Backup Table
Foreign Substance such
as a component trapped in the hole
Fig. 2F4-8
Notice
(a) When a component is trapped or dust has accumulated on the
backup table, the PCB support pins cannot be set correctly.
In this case, remove the component or the dust with a vacuum
cleaner, etc. (Air Blowing Prohibited).
(b) Do not put your hand or any heavy object on the backup table while
working with the backup table. Otherwise, the backup table may
become deformed due to an excessive load.
NOTICE
When some components are previously placed on
the back of the PCB, the PCB support pins must be
inserted such that they do not touch any component.
1212-002
4.1 Collection of PCB Support Pins and Setup Operation of Conveyor Width
2OM-1733
6-4-8
4.2 "Stkr.Area Edit" Window
[1] [2]
[3] [4] [5] [6] [7]
Fig. 2F4-9
[1] PCB Support Pin Position Display Pane
The backup table is displayed as an image in this pane.
The arrangement condition of the PCB support pins is displayed.
[2] Stock Area Image Display Pane
The stock area for the PCB support pins is displayed as an image.
When any pin is clicked, "pin presence" and "pin absence" is toggled for the
corresponding pin.
Green
: Exist
Red
: Uninstall
White
: Not exist
[3] [Clear] Button
When pressed, the arrangement parameters for the PCB support pins
arranged on the backup table, is cleared.
[4] [All Pin Uninstall] Button
When pressed, the arrangement parameters for all the support pins for the
stock area, is changed to ones for "pin absence".
[5] [Undo] Button
When pressed, the parameters are returned to the original ones before the
change is applied.
[6] [Apply] Button
When pressed, the changed arrangement parameters in the stock area are
applied.
1212-002
4.2 "Stkr.Area Edit" Window
2OM-1733
6-4-91205-001
4.2 "Stkr.Area Edit" Window
[7] [Cancel] Button
When pressed, the editing operation is ended.
Any arrangement parameter that has not been applied is cancelled.