2OM-1733-005w_F8.pdf - 第114页
2OM-1733 1-4-38 1204-001
2OM-1733
1-4-37
4.3 "Test Mode" Tab Sheet
When the [Test Mode] tab is pressed in the "OPERATION" window, the
following tab sheet appears.
[1]
[2]
Fig. 2A4-24
"
Test Mode
"
Tab Sheet
The number of test run patterns to be saved is up to three.
[1] TEST PATTERN
The pattern where the test operation mode has been designated, is selected in
this data box.
[2] [Pattern #1], [Pattern #2], and [Pattern #3] Buttons
Select one of the buttons to specify the desired pattern for designation of the
test mode.
Notice
Wrong selections (test run in wrong modes) will cause various
decienciessuchascomponentpicksbyvacuumnozzles,
scattering of components, or collision with the chute, etc.
Graphic
Development
1212-002
4.3 "Test Mode" Tab Sheet
2OM-1733
1-4-381204-001
2OM-1733
1-5-1
5. "Prod.Dt." Submenu
Fig. 2A5-1
The "Prod.Dt." submenu is provided with the following four menu items. When
each button is pressed, the corresponding window appears.
Please fully understand the purposes of each data for better performance of the
machine.
Table 2A5-1
Buttons Description
PP.Data
Pattern programs must be created for each PCB to be produced.
The automatic operation of this machine is controlled by these pattern programs.
Reference
Refer to "Pattern Program in Chapter 2" for the details.
Comp Lbry
This library stores data related to picks, recognition, and placement of each
individual component.
Reference
Refer to "Component Library in Chapter 3" or "Volume 6:
Component Library" for the details.
Temp.Chug. Comp Lbry
The corresponding window is used to change the component library temporarily
during the automatic operation.
Reference
Refer to "2. Component Library Temporary Change" in Chapter
3 or "Volume 6: Component Library" for details.
Alt Comp ID List
The corresponding window is used to setup the alternative components in placed of
the current components.
Reference
Refer to "3. Alternative Component List" in Chapter 3 for details.
Graphic
Development
1212-003
5. "Prod.Dt." Submenu