2OM-1733-005w_F8.pdf - 第289页
2OM-1733 6-3-3 [6] [Prgm Chng] Button When pressed, the pattern program is change to the one selected in the "[3] Pattern Program List". [Line] Button This button is pressed when the pattern program in all the …
2OM-1733
6-3-2
[5] [Setup all Line Select] Button
Using this button, the setup setting in the pattern program change is
performed. Whether or not the conveyor width, support pin or nozzle is
changed, is set.
Fig. 2F3-2
PCB Count
: Whether or not the No. of PCBs to be produced
is cleared, is set in this selection box.
PP.MNG.DT
: Whether of not the pattern program management
data is cleared, is set in this selection box.
Cnvr.Width
: Whether or not the conveyor width is setup, is
set in this selection box.
PCB Sup.Pins Chg.Noz.
: Whether or not the support pins are changed
automatically, is set in this selection box.
Noz.Chg.
: Whether or not the nozzle change operation is
performed, is set in this selection box.
1212-002
3. "PP CHANGE" Window
2OM-1733
6-3-3
[6] [Prgm Chng] Button
When pressed, the pattern program is change to the one selected in the "[3]
Pattern Program List".
[Line] Button
This button is pressed when the pattern program in all the machines in the
line is to be changed.
Light Blue
: This shows that the pattern program in all the machines in the
line is to be changed.
Gray
: This shows that the pattern program in the single specied
machine is to be changed.
Note
When the line consists of a single machine, this button is not displayed.
[7] "PP Chng Rcl" Tab Sheet
The pattern program change history is displayed in this section.
Fig. 2F3-3
1212-002
3. "PP CHANGE" Window
2OM-1733
6-3-41205-001