2OM-1733-005w_F8.pdf - 第42页

Safety Precautions Safe-32 1OM-1733 1208-002 5. Alert Labels No. Alert Labels and Description (13) 10-0282- Pay attention to the moving mechanisms! Do not put your hand in the moving area. Otherwise, your hand might be c…

100%1 / 358
Safety Precautions
Safe-31
1OM-1733
1208-002
5. Alert Labels
No. Alert Labels and Description
(10)
Description
l
Do not put your hand in the moving area while the feeder base is moving up or
down.
WhiletheLEDofa[FEEDERREADY]switchisickering,itindicatesthatthe
feeder base is moving upward or downward.
(11)
Description
l
Strong permanent magnets are used in the moving sections of the X/Y beam.
•
Do not bring any metal of high magnetizability close to this. Otherwise, such metal will easily
be magnetized and attracted, causing an injury to the operator or breakdown of the machine.
•
Do not bring any object such as a magnetic card or a watch close to the magnets.Such an object
can easily be affected by the magnetism. Otherwise, the data of the magnetic car might be
cleared or a watch, etc., may be damaged due to the strong magnetism.
(12)
Description
l
Do not drop a feeder. Otherwise, a foot injury will result or the feeder itself may be
damaged.
Carefully handle each feeder one by one and do not drop any.
Safety Precautions
Safe-32
1OM-1733
1208-002
5. Alert Labels
No. Alert Labels and Description
(13)
10-0282-
Pay attention to the moving
mechanisms!
Do not put your hand in the moving area.
Otherwise, your hand might be caught in
the moving area and injured.
Description
l
Be careful not to get caught.
Otherwise, a serious injury such as injury on your hand might be caused.
(14)
Do not put anything on it
This might damage the machine.
10-0326-
Description
l
Do not put any object on the machine. Doing so might damage the machine.
This might damage the machine.
(15)
Description
l
Do not put any feeder sideways nor tools on the feeder bases. Otherwise, the
machine will break down.
Safety Precautions
Safe-33
1OM-1733
5. Alert Labels
1208-002
No. Alert Labels and Description
(16)
Description
l
If you put your hand or a heavy object on the backup table while working inside the
machine, the backup table may become deformed due to an excessive load.
(17)
Description
l
Be sure to read the instruction manual carefully for correct operations before use.
If the machine is operated incorrectly, it might cause a breakdown of the machine.
(18)
Do not touch your hand
onto the head block.
10-0330-
Description
l
Do not put your hand on the head block.
Ifsignicantforceisappliedtotheheadblock,itmightdeform.
(19)
10-0314-
Push here when performing maintenance.
Description
l
When maintenance is to be performed, press here.
Whenanylocationexceptforthespeciedoneispressed,theunitmightdeform.