OM-1068-001.pdf - 第230页

Chapter 4 1-3 Tg0252-PM-SO 2. Same T ypes of Lubricants Lubricants equivalent to DAPHNE EPONEX GREASE No. 1 (IDEMITSU KOSAN) T able 4.1 Grease Names Makers Alvania Grease No. 1 SHELL OIL Multinoc Grease No. 1 NISSEKI MIT…

Chapter 4 1-2 Tg0252-PM-SO

1. Precautionary Items

Described in this session are the items related to lubrication and inspections

work for better performance of the machine.

It is recommended that lubrication and inspections work be performed peri-

odically.

CAUTION

Lubrication, Inspections, and Cleaning Work

• Only qualified personnel should perform

lubrication, inspections, and cleaning work

carefully in compliance with the specified

procedures.

• Be sure to turn off the main power of the

machine, shut off the air source, and lock

the main switch with the padlock before

lubrication, inspections, and cleaning work.

• Refer to “1.4 Notes On Maintenance” for

details.

• Take ample care not to leave the waste threads after cleaning with an oiled

rag.

• Wipe off old grease before lubrication.

• Do not blow air, etc., unless necessary.

• When a pallet or a magazine is replaced with another one, check for dam-

ages, cracks, bends, etc., to avoid any machinery breakdown and perform

the cleaning.

9911-001

Chapter 4 1-3 Tg0252-PM-SO

2. Same Types of Lubricants

Lubricants equivalent to DAPHNE EPONEX GREASE No. 1 (IDEMITSU

KOSAN)

Table 4.1

Grease Names Makers

Alvania Grease No. 1 SHELL OIL

Multinoc Grease No. 1 NISSEKI MITSUBISHI

Lisonix Grease No. 1 JAPAN ENERGY

Dynamax No. 1 COSMO OIL

Lithtan No. 1 ESSO OIL

MP Grease No. 1 KYGNUS OIL

Gemico MP No. 1 GENERAL OIL

Multemp PS-1 KYODOH YUSHI

2. Same Types of Lubricants

9911-001

Chapter 4 1-4 Tg0252-PM-SO

3. Monthly Maintenance

Table 4.2

Fig. 4.1 MP-5050

Note: (a) The component pick-up rate may deteriorate when the pallet has a

warpage.

(b) If the tape has partly peeled off on the pallet side surface or rear

side surface, apply an adhesive agent and affix it.

If the tape is worn or peeled off completely, contact our Sales De-

partment or our agent.

3. Monthly Maintenance

Maintenance Spot

REF

DWG

Description Required Item Check

Pallet Fig. 4.1 Cleaning and Damage Check Rag

Pallet

Damage Check and Cleaning (Rag)

Tape

Pallet

Check the tape for peel-off on the side and rear side.

0112-002