OM-1068-001.pdf - 第61页
8. Safety Switches Tg0252-PM-SO 01 12-001 60 8. Safety Switches When an error is detected in the machine, the safety features are designed to stop the dangerous moving mechanisms of the machine. Everything is processed o…
Tg0252-PM-SO
7. Precautions in Affixing Positions for Warning Labels
7.3 Affixing Positions for Warning Labels on Magazine
The figure shows Magazine L (MG-5050L).
Magazine R (MG-5050L) has the same structure.
0112-001 59
Description: Press the black circle to close the door.
Result: Distortion of Door
Prevention Measure: Do not press other than with the black circle.
8. Safety Switches
Tg0252-PM-SO0112-001 60
8. Safety Switches
When an error is detected in the machine, the safety features are
designed to stop the dangerous moving mechanisms of the
machine. Everything is processed on the machine side (hardware)
without using any software application on the computer side.
8.1 [EMERGENCY STOP] Buttons
The multi-layer tray feeders are not provided with any emergency
stop button.
The emergency stop buttons of the main machine (TIM-5100) are
commonly used for these feeders. Press any one of the [EMER-
GENCY STOP] buttons of the main machine to stop the machine
immediately in an emergency.
The power is turned off and the machine stops immediately.
(Front View) (Side B) (Rear View) (Side A)
[EMERGENCY STOP]
Button (2) SPB52
[EMERGENCY STOP]
Button (4) SPB54
[EMERGENCY STOP]
Button (1) SPB51
[EMERGENCY STOP]
Button (3) SPB53
8. Safety Switches
Tg0252-PM-SO0112-001 61
Switch Name
Symbol Countermeasures
[EMERGENCY STOP]
Button (1) (Front Side)
[EMERGENCY STOP]
Button (2) (Front Side)
[EMERGENCY STOP]
Button (3) (Rear Side)
[EMERGENCY STOP]
Button (4) (Rear Side)
Pressing one of the [EMERGENCY STOP] buttons cuts
power to the following modules.
• The load power is shut off.
• Power to the motors excluding those for the vacuum
pump, the cooling fan, and the nozzle rotational shaft
(power to the motors for tape feed in the feeder base,
the traverse shaft, and the tray feeder elevator shaft is
shut off in 1 second after the [EMERGENCY STOP]
button is pressed.)
• 24 V Load Power in Solenoid Valve System of Main
Machine
(Excluding the solenoid valve for component picks, the
solenoid for the supply cover electromagnetic lock, the
solenoid for the safety bar electromagnetic lock, the
solenoid valve for tape feed, and the control power
sources such as those for the sensors, etc.)
SPB51
SPB52
SPB53
SPB54