OM-1068-001.pdf - 第50页
5. Precautions in Installation Tg0252-PM-SO 5.6 Install the device somewhere where there is no electrical noise • Install the device somewhere where there is no electrical noise. • Prevent noise with other equipment to a…
5. Precautions in Installation
Tg0252-PM-SO
0112-001 48
5.5 Install somewhere where atmospheric tempera-
ture and humidity is with in the specified range
• Install the device where atmospheric temperature range is 20 ±
10°C.
Also, install it where the humidity range is 20 to 80 % without
condensation.
••
••
• Dangers if atmospheric temperature or humid-
ity exceeds the specified range
• Smoke or fire might be caused by the device being at abnor-
mally high temperature.
CAUTION
Example: Smoke cause by abnormal heating
Smoking/
Injection
Atmospheric
Temperature
20 ± 10°C
Atmospheric
Humidity
30 to 80%
Beware of Temperature and Humidity
CAUTION
5. Precautions in Installation
Tg0252-PM-SO
5.6 Install the device somewhere where there is no
electrical noise
• Install the device somewhere where there is no electrical noise.
• Prevent noise with other equipment to avoid malfunction of the
device.
••
••
• Danger of noise near the device
• Device malfunction might be occur due to noise.
0112-001 49
Example: Malfunction caused by Noise
CAUTION
Collision
Compulsion
Noise Prevention Measures
Beware of Noise
CAUTION
Run Away
5. Precautions in Installation
Tg0252-PM-SO
5.7 Install the device in clean air
• Install the device away from flammable or corrosive gases.
• Install the device away from lamp soot or dust.
••
••
• Dangers caused by failure to ensure clean air
• Smoke or fire might result from flammable gas, etc.
• Breakdown might result from corrosive gas or dust.
0112-001 50
Beware of gas around the device
CAUTION
Beware of Lamp Soot and Dust
CAUTION
CAUTION
Example: Injecting Flammable Gas, etc.
Smoking/
Injection