OM-1068-001.pdf - 第87页
5. Preparation and Confirmation before Operation 5.1 Preparation (Outline) for Pattern Program 5.1.1 Component Library Data Editing Procedure of Component Library Data for FP-5021L (The same procedure applies to the comp…
4. Set-up and Flow Chart for Automatic Operation
• The shadowed items are related to the multi-layer tray feeders.
Follow the procedures (outline) below before actually producing P.C.B.’s
for details.
Refer to “5., 6., and 10. of Section 2 in Chapter 1” for details.
4. Set-up and Flow Chart for Automatic Operation
0010-002 Chapter 1 2-7 Tg0252-PM-SO
Component Replenishment during Automatic Operation
Refer to "7.1 Component Supply During Automatic Operation of
Section 2 in Chapter 1" for details.
Possible Operations during Automatic Operation
Refer to "11.1.3 Tray Chuck Matrix Change Operations of Section 2 in Chapter 1"
and "4. Matrix Change Operations of Section 3 in Chapter 1" for details.
Preparation for Pattarn Program
Program Change Operation
Pattern Program Checking for Production Model
Setting of Operation Mode
Start of Automatic Operation
Stop of Automatic Operation
Shut-Down Operation
(1) Preparation for Component Library
Refer to "5.1.1 Component Library Data of Section 2 in Chapter 1" for details.
(2) Creation of Pattern Program Data for Production Model
Refer to "5.1.2 Component Data of Section 2 in Chapter 1" for details.
(3) Registration of Pattern Program for Production Model
(1) Zeroing Operation
Refer to"2. Zeroing Operation of Section 4 in Chapter 1" and "11.1.2 Zeroing
Operation Maneuvered on Main Machine Side of Section 2 in Chapter 1" for details.
(2) Selection of Current Pattern program (Program Change)
(3) Adjustment of P.C.B. Positioning Section
(4) Preparation for Nozzle Stocker Section
(5) Preparation for Multi-Layer Tray Feeder
Refer to "5.2.1 Preparation of Pallet of Section 2 in Chapter 1",
"5.2.2 Preparation of Magazine of Section 2 in Chapter 1",
"5.2.3 Attachment and Detachment of Magazine of Section 2 in Chapter 1",
"5.2.4 FEEDER (B) OFFSET Display of Section 2 in Chapter 1" for details.
5. Preparation and Confirmation before Operation
5.1 Preparation (Outline) for Pattern Program
5.1.1 Component Library Data
Editing Procedure of Component Library Data for FP-5021L
(The same procedure applies to the component library data for
FP-5021R.)
Refer to “COMPONENT LIBRARY” in main machine instruction manual for
details.
Data can be edited on the main machine side.
(1) When the [TRAY] key is pressed at the “COMP. LIBRARY [FEEDER]”
display, the following display appears on the screen.
(2) Enter the component library data.
Note: The component library data cannot be edited with the main ma-
chine in the “RUN” or “WAIT” mode when the multi-layer tray
feeder is included in the production model.
Fig. 1.10
Hierarchical Sequence
(Display)
“MAIN MENU”
“DATA EDIT”
“COMPONENT LIBRARY
EDIT”
“COMP. LIBRARY
[FEEDER]”
5. Preparation and Confirmation before Operation
0005-002 Chapter 1 2-8 Tg0252-PM-SO
Fig. 1.11-2
Fig. 1.11-1
5.1.2 Component Data
5.1.2.1 Component Data
Refer to “2.5.3 Tray Feeders (Option) of Section 2 in Volume 2” and “4.5.2
Editing of Tray Component Data (Option) of Section 2 in Volume 2” in the
main machine instruction manual for details.
Data can be edited on the main machine side.
(1) Press the [TRAY L (F301-F599)] or the [TRAY R (F601-F899)] key at
the “PATTERN PROGRAM EDIT” display. The display (Fig. 1.11-1)
appears on the screen.
(2) Press the [DATA EDIT] key.
The display (Fig. 1.11-2) appears on the screen.
(3) Component IDs are allocated to feeder Nos. (FDR No.).
Note: The component data can be edited only with the main machine in
the “STOP” or “PAUSE” mode when the multi-layer tray feeder
is included in the production model.
Hierarchical Sequence
(Display)
“MAIN MENU”
“DATA EDIT”
“PATTERN PROGRAM”
“PATTERN PROGRAM
EDIT”
“COMPONENT DATA
-TRAY-”
5. Preparation and Confirmation before Operation
[DATA EDIT] Key[RTN] Key
9911-001 Chapter 1 2-9 Tg0252-PM-SO