OM-1068-001.pdf - 第94页
5. Preparation and Confirmation before Operation Tg0252-PM-SO • Do not press the pallet as shown in the figure. It might cause Pallet deforma- tion. • Do not pile up the pallet to store, as shown in the figure. It might …
5. Preparation and Confirmation before Operation
Chapter 1 2-14 Tg0252-PM-SO
5.2 Program Change
5.2.1 Pallet Set-up
5.2.1.1 Precautions in Pallet Handling
• Do not drop the pallet on the floor. It might cause pallet deformation.
• Do not press the pallet as shown in the figure. It might cause deformation.
Fig. 1.15-2
• Handle the pallet carefully.
• A deformed pallet may lead to a pick-up error. If pick-
up errors occur frequently, consult our marketing de-
partment or sales agency
CAUTION
Fig. 1.15-3
0010-002
Pressure
Pressure
Drop
5. Preparation and Confirmation before Operation
Tg0252-PM-SO
• Do not press the pallet as shown in the figure. It might cause Pallet deforma-
tion.
• Do not pile up the pallet to store, as shown in the figure. It might cause Pallet
deformation.
Ref. : How to check for pallet deformation
(1) Place the pallet on a flat place.
(2) Check against warpage along the whole bottom of the pallet.
Fig. 1. 15-4
Fig. 1. 15-5
Fig. 1. 15-6 Correct Pallet Fig. 1. 15-7 Deformed Pallet
20/ Deformed Pallet
0010-001 Chapter 1 2-14-1 Tg0252-PM-SO
Pressure
5. Preparation and Confirmation before Operation
Tg0252-PM-SO
5.2.1.2 Tray Attachment to Pallet
(1) Put a tray on the pallet.
• To load MG-5050L with a pallet
Put a tray on the rear left side of the pallet.
• To load MG-5050R with a pallet
Put a tray on the rear right side of the pallet.
Note: Don't make an error about the front and rear of the pallet.
Fig. 1.16 Position of Tray on Pallet (Top View)
0010-001 Chapter 1 2-14-2