OM-1068-001.pdf - 第234页
Chapter 5 This chapter covers the air piping and electrical circuit dia- grams, etc. 991 1-001 C ha p te r 5 1 Tg0252-PM-SO Materials
Chapter 4 1-6 Tg0252-PM-SO
5. Detachment and Attachment of Center Cover
DANGER
• When the center cover of multi-layer tray
feeder is detached, the load power is shut
off.
• Do not supply power to the machine or per-
form any operations with the center cover be-
ing detached.
5.1 Detachment
(1) Zero the multi-layer tray feeder.
Refer to “2. Zeroing Operation of Section 4 in Chapter 1” for details.
(2) Separate the upper and lower magazines from the elevator shaft.
Refer to “3.1 ELEVATOR UNIT Display of Section 4 in Chapter 1” for
details.
(3) Remove the setscrews (4 locations) fastening the center cover with a
Phillips-type screwdriver. (See Fig. 4.3.)
The center cover can be detached.
Fig. 4.3 FP-5021L (Same to “FP-5021R”)
5.2 Attachment
(1) Align the screw holes of the center cover with the screw holes of the
multi-layer tray feeder.
(2) Hold the center cover in position and fasten it securely with setscrews
(4 locations), using a Phillips-type screwdriver.
5. Detachment and Attachment of Center Cover
Setscrews fastening the center cover (4 locations)
Center Cover
0005-002
Chapter 5
This chapter covers the air piping and electrical circuit dia-
grams, etc.
9911-001 Chapter 5 1 Tg0252-PM-SO
Materials