OM-1068-001.pdf - 第69页
1. Scope This machine supplies a component tray to the traverse so that the place- ment heads of the multi-functional electronic component placement ma- chine “TIM-5100 (Main Machine)” can pick up components directly fro…
Tg0252-PM-SO
9911-001 Chapter 1 1-1
Scope
Section 1
1. Scope
This machine supplies a component tray to the traverse so that the place-
ment heads of the multi-functional electronic component placement ma-
chine “TIM-5100 (Main Machine)” can pick up components directly from
the tray.
2. Specifications
1. Scope
1. Model Name
FP-5021L
FP-5021R
3. Applicable Tray
Unit : mm
Notes : (a) If the value of “t
1” or “t2” is 11.5 mm or more, the partition
plate (at even steps) is required to be removed when the tray
is set to the magazine.
(b) “S (Leeway)” becomes “Max. 0.5 mm” when the outer
dimensions of the mold is "9 × 9 mm" or less.
(c) The mass of components and the tray fixing metals is in-
cluded.
(d) Some components cannot be used due to the mechanical
characteristics. Consult our marking department or agency for
details.
Min. 150 3 3 - -
Max.
225 360 28
(a)
28
(a)
1
(b)
500 g
(c)
100
0112-003 Chapter 1 1-2 Tg0252-PM-SO
t1 t2
a b S (Leeway) Mass
2. Construction of
Device
• Multi-Layer Tray Feeder
• Magazine (2 kinds : MG-5050L, MG-5050R) :
2 pieces as standard equipment
Note : Use one of them according to the multi-layer tray feeder.
• Pallet (MP-5050) : 20 pieces as standard equipment
• Tray Fixing Metal (2 kinds : MF-5050L, MF-5050R) :
20 pieces as standard equipment
Note: Use one of them according to the magazine.
2. Specifications
5. Number of
Installable Types
of Components
180 types/FP-5021L or R
4. Applicable
Components
Min. 7 5 5 - -
Max. 55 55 52 52 25.4 -
7
a b c d t
Lead End
Thickness
Mass
0.10
20 g
• Flat Packaged ICs
• Other similar-shaped components
Unit : mm
Notes : (a) Irregularly-shaped components can also be used when an op-
tional device is provided.
(b) Some components cannot be used due to the mechanical charac-
teristics. Consult our marketing department or agency for details.
6. Number of
Stocked Trays
Max. 9 trays/pallet
Max. 10 pallets/magazineL × 2 magazines
Notes : (a) A special plate is required to set the trays depending upon the
number of stocked trays.
(b) The number of installable pallets is limited, depending upon the
tray height.
7. Total Mass of
Magazines
Max. 17.5 kg/magazine
Total Mass per Pallet (Reference Mass)
(Tray + Component + Tray Fixing Metals) + Pallet Dead Load
= Max. 0.58 kg + 0.42 kg
= Max. 1.0 kg/pallet
Max. 10 pallets/magazine
Note: When the total mass per magazine including pallets of great mass
exceeds 15.8 kg, the maximum number of installable pallets may
become less than 10. Consult our marketing department or agency
for details.
8. Magazine Batch
Replacement
Magazines (10 pieces of pallets stored) can be replaced in batches.
9. Magazine Sepa-
ration Function
The section where magazines are installed can be separated at the upper or
the lower end of the elevator, making it possible to replace magazines or trays
while the machine is running.
10. Power Supply
200 V AC (The power is supplied from the main body of TIM-5100.)
11. Air Pressure
0.49 MPa (5 kgf/cm
2
) Dry and Clean Air (Water, oil, and dust are removed.)
(The air is supplied from the main body of TIM-5100.)
12. Air Consumption
Approx. 2 l/min (ANR)
0112-003 Chapter 1 1-3 Tg0252-PM-SO
Applicable Components for Reference