OM-1068-001.pdf - 第90页
5.1.2.3 T ray (L) Operation Data Refer to “2.5.5 TRA Y (L) OPERA TION DA T A Display (Option) of Section 2 in V olume 2” and “4.5.4 Editing of T ray (L) or (R) Operation Data (Option) of Section 2 in V olume 2” in the ma…
5.1.2.2 Tray Steps Information
Refer to “2.5.4 Tray Step Information (Option) of Section 2 in Volume 2” and
“4.5.3 Editing of Tray Steps Information Data (Option) of Section 2 in Vol-
ume 2” in the main machine instruction manual for details.
(1) When the [TRAY STEP INFO] key is pressed at the display (Fig. 1.11-
1), the display (Fig. 1.12-1) appears on the screen.
(2) Specify what type of components (FDR NO) you should set in which
block of which step with the tray unit.
Fig. 1.12-2
Fig. 1.12-
1
5. Preparation and Confirmation before Operation
[1 ( 1)] Key[RTN] Key
9911-001 Chapter 1 2-10 Tg0252-PM-SO
5.1.2.3 Tray (L) Operation Data
Refer to “2.5.5 TRAY (L) OPERATION DATA Display (Option) of Section 2
in Volume 2” and “4.5.4 Editing of Tray (L) or (R) Operation Data (Option) of
Section 2 in Volume 2” in the main machine instruction manual for details.
(1) When the [TRAY (L) OPN DATA] key is pressed at the display (Fig.
1.12-1), the display (Fig. 1.13) appears on the screen.
• Set an operation mode.
Fig. 1.13
5. Preparation and Confirmation before Operation
9911-001 Chapter 1 2-11 Tg0252-PM-SO
Fig. 1.14
5. Preparation and Confirmation before Operation
5.1.2.4 Automatic Offset X Setting
Refer to “2.5.6 OFFSET X AUTO SETTING Display (Option) of Section 2 in
Volume 2” and “4.5.5 OFFSET X AUTO SETTING Display (Option) of Sec-
tion 2 in Volume 2” in the main machine instruction manual for details.
(1) When the [OFFSET X AUTO SET] key is pressed at the display (Fig.
1.12-1), the display (Fig. 1.14) appears on the screen.
• The offset values for the tray position offset “X (mm)” can be set for
each individual tray by selecting either the [AUTO (LEFT)] or the
[AUTO (RIGHT)] key.
• When the [SELECT ALL STEP] key is selected and either the [AUTO
(LEFT)] or the [AUTO (RIGHT)] key is pressed, the left or right offset
values X in all steps can be set automatically.
9911-001 Chapter 1 2-12 Tg0252-PM-SO