OM-1068-001.pdf - 第231页
Chapter 4 1-4 Tg0252-PM-SO 3. Monthly Maintenance T able 4.2 Fig. 4.1 MP-5050 Note: (a) The component pick-up rate may deteriorate when the pallet has a warpage. (b) If the tape has partly peeled off on the pallet side s…
Chapter 4 1-3 Tg0252-PM-SO
2. Same Types of Lubricants
Lubricants equivalent to DAPHNE EPONEX GREASE No. 1 (IDEMITSU
KOSAN)
Table 4.1
Grease Names Makers
Alvania Grease No. 1 SHELL OIL
Multinoc Grease No. 1 NISSEKI MITSUBISHI
Lisonix Grease No. 1 JAPAN ENERGY
Dynamax No. 1 COSMO OIL
Lithtan No. 1 ESSO OIL
MP Grease No. 1 KYGNUS OIL
Gemico MP No. 1 GENERAL OIL
Multemp PS-1 KYODOH YUSHI
2. Same Types of Lubricants
9911-001
Chapter 4 1-4 Tg0252-PM-SO
3. Monthly Maintenance
Table 4.2
Fig. 4.1 MP-5050
Note: (a) The component pick-up rate may deteriorate when the pallet has a
warpage.
(b) If the tape has partly peeled off on the pallet side surface or rear
side surface, apply an adhesive agent and affix it.
If the tape is worn or peeled off completely, contact our Sales De-
partment or our agent.
3. Monthly Maintenance
Maintenance Spot
REF
DWG
Description Required Item Check
Pallet Fig. 4.1 Cleaning and Damage Check Rag
Pallet
Damage Check and Cleaning (Rag)
Tape
Pallet
Check the tape for peel-off on the side and rear side.
0112-002
Chapter 4 1-5 Tg0252-PM-SO
4. Maintenance (Every 3 Months after Initial Month)
Table 4.3
Fig. 4.2 Elevator Shaft of FP-5021L (Same to “FP-5021R”)
4. Maintenance (Every 3 Months after Initial Month)
DANGER
• Be sure to shut off the power before detach-
ing the center cover of the multi-layer tray
feeder.
• Do not supply power to the machine or per-
form any operations with the center cover be-
ing detached.
Elevator
Shaft
Linear Way
Cleaning (Oiled Rag) and Lubrication
(DAPHNE EPONEX GREASE No. 1)
Ref.: The center cover must be detached to apply
grease to the elevator shaft.
Refer to “5. Detachment and Attachment of
Center Cover of Section 1 in Chapter 4” for the
detailed information on how to detach the cen-
ter cover.
Elevator
Shaft
Ball Screw
Cleaning (Oiled Rag) and Lubrication
(DAPHNE EPONEX GREASE No. 1)
Maintenance Spots
REF
DWG
Description Required Items Check
Ball Screw Fig. 4.2 Cleaning and
Lubrication
Oiled Rag, DAPHNE
EPONEX GREASE No. 1,
and Brush
Elevator Shaft
Linear Way Fig. 4.2 Cleaning and
Lubrication
Oiled Rag, NEW
MOLYNOC GREASE No.
1, Brush
9911-001