YV180X_Mainte_E.pdf - 第135页
5 -6 Service Manual Chapter 5 SED8013110 5 Manual mode 2.2 Feeder out monitor <3/4/A2> When <3/4/A2 FEEDER OUT MONITOR> is selected, the FEEDER OPERA TION screen appears as shown belo w . Pressing the [ENTER]…
5
-5
SED8013110
Service Manual
Chapter 5
5
Manual mode
● How to read the input/output monitor
The left half is the output monitor and the right half is the input monitor.
To move the cursor between the output and input monitors, press the [TAB]
key. The active monitor is switched as the cursor moves. To see more items
on the output or input monitor screen, use the UP/DOWN arrow keys (or
[Page Up/Down] keys). When there are multiple items (binary digits) along
one line, use the right/left arrow keys to align the yellow cursor with the
item you want to check or operate.
Familiarize yourself thoroughly with this section since you will be
frequently opening output and input monitor screens in MANUAL mode in
order to check mechanical and electrical operation during adjustment.
Input/output monitor screen description
47504-D8-00
CONV
CONV
CONV
CONV
CONV
CONV
CONV
CONV
OUT
1
0
0
0
0
0
00000000
00000000
0
0
0
0
0
0
0
0
IN
T1920
T1922
T1923
T1924
T1867
T1921
T4E60
T4E70
N1113
N1117
N1115
N1120
N1116
N1030
N1121
N1123
I/O MONITOR DISP. TYPE SELECTION
MAIN STOPPER (A TABLE) UP
OFF 0 / ON 1
COUNT RESET
NOT DETECT 0 / DETECT 1
Selected Arm A_table XY
Moving Speed 40
From McahineOrigin X1= Y1= Z1= R1=
CONV
CONV
CONV
CONV
CONV
CONV
CONV
CONV
OBJECT CONV
<<<APPLICATION>>> 3/MAINTE/M
<<MODE>> 4/MANUAL
↑
↓
↑
↓
1
2
3
1. Description box
Input and output signals on the I/O monitor screen are identified by
code names such as “T1920” and “T1922” and their descriptions
displayed in a light blue box, giving the item and an explanation of
what “0” and “1” correspond to.
2. Digital I/O signal status
The status of each I/O signal is expressed in binary digits (1 and 0). The
output monitor above shows for example that the main stopper “T1920”
is ON (raised). Each time you press the [ENTER] key on the output
monitor screen, the selected item on which the cursor is placed turns
ON and OFF. On the input screen, you can check the detection status of
the sensor.
3. Selected arm, moving speed and positions from the machine origin
Displayed in the lower part of an output or input monitor screens are
the selected arms (axes) and moving speed during adjustment, and the
current position of each axis. The arms and speed can be switched by
pressing the [SEL AXIS] or [AXIS GROUP] key and [SPEED] key on
the YPU, or with the <3/4/B1 SELECT SERVO MOTOR> and <3/4/B1
RUNNING SPEED> commands.
5
-6
Service Manual
Chapter 5
SED8013110
5
Manual mode
2.2 Feeder out monitor
<3/4/A2>
When <3/4/A2 FEEDER OUT MONITOR> is selected, the FEEDER
OPERATION screen appears as shown below. Pressing the [ENTER] key
turns the air valve operation on and off for the feeder on which the cursor
is placed.
FEEDER OPERATION screen
47505-D8-00
< FEEDER OPERATION >
1 - 8
9 - 16
17 - 24
25 - 32
33 - 40
41 - 48
49 - 56
57 - 64
00000000
00000000
00000000
00000000
00000000
/ / / / / / / /
/ / / / / / / /
/ / / / / / / /
101 - 108
109 - 116
117 - 124
125 - 132
133 - 140
141 - 148
149 - 156
157 - 164
<<<APPLICATION>>> 3/MAINTE/M
<<MODE>> 4/MANUAL
<COMMAND_LIST> A/IO_UTILITY
00000000
00000000
00000000
00000000
00000000
/ / / / / / / /
/ / / / / / / /
/ / / / / / / /
2.3 Vacuum IN monitor
<3/4/A4>
When <3/4/A4 VACUUM IN MONITOR> is selected, the VACUUM
SENSOR LEVEL screen appears as shown below. Pressing the [ENTER]
key allows you to monitor the vacuum operation of the head on which the
cursor is placed.
VACUUM SENSOR LEVEL screen
47506-C0-A0
[ ↑ ] [ ↓ ] : Select Head [Enter]:Vaccum ON/OFF
VACCUM SENSOR LEVEL
CURRENT
0
0
0
0
0
0
0
0
MAXINMUM
0
0
0
0
0
0
0
0
MINIMUM
0
0
0
0
0
0
0
0
HEAD
A
A
A
A
A
A
A
A
From MachineOrigin X1= Y1= Z1= R1=
<<<APPLICATION>>> 3/MAINTE/M
<<MODE>> 4/MANUAL
<COMMAND_LIST> A/IO_UTILITY
[Esc]:Exit
[Space]:Freeze Display
5
-7
SED8013110
Service Manual
Chapter 5
5
Manual mode
2.4 Change nozzle
<3/4/A5>
Use the <3/4/A5 NOZZLE CHANGE> command to change the nozzle of a
particular head. This command is enabled only for heads with an FNC
(flying nozzle change) function (Heads 2, 4, 6, 8).
CHANGE NOZZLE command
47507-D8-00
<<<APPLICATION>>> 3/MAINTE/M
<<MODE>> 4/MANUAL
<COMMAND_LIST> A/IO_UTILITY B/SERVO_CONTROL
A5 CHANGE NOZZLE
SELECT NOZZLE
Type 71
Type 72
Type 73
Type 74
Type 75
Type 76
Type 77
Head Selection
Head 1
Head 2
Head 3
Head 4
Head 5
Head 6
Head 7
Head 8
Table Selection
A table
B table
Reference
This command is the same as the <3/3/A5 CHANGE NOZZLE> command in
MACH_ADJUST mode.
2.5 Conveyor units
<3/4/A0>
This command allows you to turn on and off the conveyor units for clamp-
ing a PCB in the component mounting position.
CONVEYOR UNITS menu box
47508-D8-00
OFF
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
LOCATE PIN
PUSH UP
PCB CLAMP
EDGE CLAMP
PUSH IN
MAIN STOPPER
ENT.STOPPER
EXIT STOPPER
CONV. MOTOR
CONV. WIDTH
PROGRAM PIN
RETURN
CONVEYOR UNIT (STS.)
<<<APPLICATION>>> 3/MAINTE/M
<<MODE>> 4/MANUAL
<COMMAND_LIST> A/IO_UTILITY B/SERVO_CONTROL
A0 CONVEYOR UNITS
Reference
This command opens the same CONVEYOR UNITS menu box that appears when you run
the <1/1/D4 ASSISTANT UTILITY> command in OPERATION Manager or the <2/1/B7
CONVEYOR UNITS> command in DATA Manger. For details on this menu, see the
mounter operation manual.