YV180X_Mainte_E.pdf - 第30页
2 -11 SED8013110 Service Manual Chapter 2 2 Machine configuration mode 2.2 ROM configuration <3/1/A2> When you select <3/1/A2 OPTION CONFIG.>, the information on the R OM used in this machine is displayed. 47…
2
-10
Service Manual
Chapter 2
SED8013110
2
Machine configuration mode
Slide Feeder Bar Specify the type of a feeder exchange carriage if
installed.
“None”: Select this when no feeder exchange
carriage is installed.
“NonStop”: Select this when a nonstop feeder
exchange carriage is installed.
“EMG”: Select this when a feeder exchange
carriage without nonstop function is installed.
Co-Planarity Sensor Specify the position (table) of the co-planarity
sensor when installed. Set to “None” when not
installed.
Dispense Data This is only for dispenser machines. Set to
“Disappear” for the YV180X machine.
Dot Station This is only for dispenser machines with a dot
station. Set to “None” for the YV180X machine.
RS232C extension Set to “Exist” when an RS232C extension board
is installed. Set to “None” when not installed.
Option Edit Set to “Exist” when optional functions are
installed and you want to display those param-
eters in the component information and PCB
information screens in DATA Manager.
Comp. Info. Mode Standard machine should be set to “V2.0
Compatible”.
Mount Info. Mode Standard machine should be set to “V2.0
Compatible”.
Screen saver Specify the length of time until the screen saver
starts. Set to “”None” when not using the screen
saver.
MultiCam. Marker When this function is enabled, the machine
recognizes components by using the reference
marker provided on the head assembly. This
minimizes unwanted effects on recognition
accuracy from mechanical changes over time.
This function can also be selected by individual
component types in the component information.
Set to “Marker 2” when using this function with
the YV180X. Set to “NoUse” when not using this
function.
Mapping Calibration When this function is enabled, the mechanical
distortion is corrected beforehand, increasing
component mount accuracy.
Set to “Use” when using this function. Set to
“NoUse” when not using this function.
Feeder Group Specify the feeder type (FV type or CL type) to
be used with this machine.
2
-11
SED8013110
Service Manual
Chapter 2
2
Machine configuration mode
2.2 ROM configuration
<3/1/A2>
When you select <3/1/A2 OPTION CONFIG.>, the information on the
ROM used in this machine is displayed.
47204-C0-00
<<<APPLICATION>>> 3/MAINTE/M
<<MODE>> 1/MCH_CONFIG
ROM TYPE
HEAD(A)- I/O-ROM
HEAD(B)- I/O-ROM
CONVEYOR(A)- I/O-ROM
CONVEYOR(B)- I/O-ROM
SYSTEM-ROM
YPU-ROM
CURRENT ROM
2.3 File configuration
<3/1/A3>
When you select <3/1/A2 FILE CONFIG.>, the names of files and directo-
ries stored in this machine are displayed as well as the loading status of
those files.
47205-C0-00
<<<APPLICATION>>> 3/MAINTE/M
<<MODE>> 1/MCH_CONFIG
FILES & DIRECTORY
MACHINE-TYPE-PATH
MESSAGE-FILE-PATH
APL-EXE.FILE
VISION-HEX.FILE
IO(OS)BIN.FILE
IO(IPL)HEX.FILE
AC-SERVO-HEX.FILE
REQUEST VERSION
KG2-48T0.030¥¥
KG2-48M0.030¥¥
KW8-42E0-030
KW7-44DD.409
KG2-42S8.00A
KG2-42S89.005
KM5-58D9.025
STATUS
OK
OK
OK
OK
OK
OK
OK
<< VIOS Version 3.00 Revision 1.000 Date 2000/ 9/ 5 >>
Reference
This screen appears when the machine starts up and then changes to the next screen after
loading the necessary files.
2
-12
Service Manual
Chapter 2
SED8013110
2
Machine configuration mode
2.4
Warning lamp spec information <3/1/A4>
When <3/1/A4 PATLIGHT SPEC INF.> is selected, the warning lamp and
alarm buzzer screen appears. You can check the current settings (Editing is
not supported currently.)
Warning lamp spec information
47206-D8-00
<<<APPLICATION>>> 3/MAINTE/M
<<MODE>> 1/MCH_CONFIG
Status PatLight
Mode
RUN
STOP
Case
RUN
INTERLOCK
ERROR
EMG
WAIT
NON
-(UNDEF 00)-
INTERLOCK
-(UNDEF 01)-
EMG
WAIT
NON
Green
ON
OFF
OFF
OFF
BLINK
OFF
OFF
OFF
OFF
OFF
OFF
OFF
Red
OFF
OFF
OFF
ON
OFF
OFF
OFF
OFF
OFF
ON
BLINK
OFF
Yellow
OFF
BLINK
BLINK
OFF
OFF
OFF
OFF
BLINK
OFF
OFF
OFF
OFF
Buzzer
OFF
BLINK
BLINK
OFF
OFF
OFF
OFF
BLINK
OFF
OFF
OFF
OFF
2.5 Machine maintenance utility
<3/1/A7>
Selecting <3/1/A7 MACHINE MTN. UTL.> allows you to check how the
maintenance functions for the machine are working, based on the mainte-
nance file prepared beforehand.
Machine maintenance utility submenu
47207-D8-00
<<<APPLICATION>>> 3/MAINTE/M
<<MODE>> 1/MCH_CONFIG
<COMMAND_LIST> A/MCH_CFG
A1 OPTION CONFIG.
A2 ROM CINFIG.
A3 FILE CONFIG.
A4 PATLAIGHT SPEC. INF.
A5
A6
A7 MACHINE MTN.UTL.
A8 FLYING NOZZLE INF.
Machine Maintenance Utility
Check FUnction Status
Display Item List
Edit Count Value