YV180X_Mainte_E.pdf - 第21页
Chapter 2 Maintenance manager and Machine configuration mode This chapter explains the Maintenance Manager of the Y AMAHA VIOS software for adjusting the machine and data. T his chapter also describes parameters used in …
1
-10
Service Manual
Chapter 1
SED8013110
1
Inspection and maintenance
2.3 Recommended grease
Use the following grease specified by YAMAHA or YAMAHA sales dealer
and apply it mainly to the parts for each axis. Use machine oil to lubricate
the parts used in nozzles.
Recommended grease
45104-C0-00
Product name/
Type No.
Thickening agent
Consistency
Condensation point
Operating temperature
NSK 1 Albania No.2
Lithium
Approx. 272 to 280
Approx. 182°C to 198°C
Approx. -25°C to +130°C
Unilube No.2
Daphne
Eponex No.2
Manufacturer NSK SHELL Kyodo Yushi Idemitsu
Chapter 2
Maintenance manager and
Machine configuration mode
This chapter explains the Maintenance Manager of the YAMAHA
VIOS software for adjusting the machine and data. This chapter also
describes parameters used in MCH_CONFIG (machine configura-
tion) mode to make settings according to the machine specifications
and options connected to the machine.
1. About the Maintenance manager ......................................... 2-3
2. Machine configuration mode ............................................... 2-5
2.1 Option configuration <3/1/A1> ................................................2-6
2.1.1 Basic menu in OPTION CONFIG. mode 2-6
2.1.2 Detail menu in OPTION CONFIG. mode 1-8
2.2 ROM configuration <3/1/A2>................................................. 1-11
2.3 File configuration <3/1/A3> ................................................... 1-11
2.4 Warning lamp spec information <3/1/A4>.............................. 1-12
2.5 Machine maintenance utility <3/1/A7> .................................. 1-12
2.6 Flying nozzle information <3/1/A8>.......................................1-13
2.7 Head spec information <3/1/B1> ...........................................1-13
2.8 Feeder plate information <3/1/B2>.........................................1-14
2.9 Nozzle spec information <3/1/B3>.........................................1-15
2.9.1 Nozzle spec common information1-15
2.9.2 Nozzle spec type information 1-16
2.10 Feeder spec information <3/1/B3> ......................................... 1-17
2.10.1 Feeder spec common information 1-18
2.10.2 Feeder spec type information 1-19
2
-3
SED800A100
Service Manual
Chapter 2
2
Machine configuration mode
1. About the Maintenance manager
YAMAHA surface mounters and related machines operate with the VIOS
software specially developed by YAMAHA. The VIOS software allows you
to select the target command or parameter you want to run, check or
change through an easy-to-use hierarchical structure divided into 4 applica-
tion managers as shown below. This chapter describes the
The MAINTENANCE manager is further divided into the following 4
modes, and each mode has commands as shown in the diagram on the next
page.
MAINTENANCE Manager structure
43201-C0-00
1/OPERATION/M
2/ DATA /M
3/MAINTENANCE/M
4/SHELL/M
0/EXIT
Application Manager Command ListMode
1/MCH_CONFIG
2/MCH_DATA
3/MCH_ADJUST
4/MANUAL
0/EXIT
A/UTILITY
B/SAVE & QUIT
A/IO
UTILITY
B/SERVO_CONTROL
A/MCH_CONFIG
B/SPEC INF
n
NOTE
For information on items selectable in each mode, press the [F1] key and refer to the help
message displayed on the operation monitor as necessary.