YCP10 Users_E.pdf - 第113页

4-17 4 Daily operation 7.3 Using the mask adaptor When the "600 x 550", "584 x 584" or "550 x 650" size mask is used for the mask setting, special mask adaptors (option) are required. F ollo…

100%1 / 288
4-16
4
Daily operation
7.2 Mask frame dimensions and mask standard position
n
Mask frame dimensions and mask standard position
Specifications
Applicable
mask frame
size (mm)
Mask standard position
Standard
position
offset
Setting X direction
Y direction
A: From outside of mask frame (mm)
B: From center of mask (mm)
X Y
YCP10
L750×W750
Center
Center
0 0
Center A 145 B 230 0 0
L736×W736
Center
Center
Center 0 0
Center A 138 B 230 0 0
L650×W550
Center
Center
Center 0 0
Front A 150 B 125 0 0
Minami Kogaku L750×W650
Center
Center
Center 0 0
Front A 150 B 175 0 0
Mask standard position is “Front”.
Mask standard position “Front”
Mask center
A
B
Standard position
63424-N1-00
4-17
4
Daily operation
7.3 Using the mask adaptor
When the "600 x 550", "584 x 584" or "550 x 650" size mask is used for the mask setting, special mask
adaptors (option) are required. Follow the steps below to install the mask adaptors in the four places of the
mask clamp.
Mask adaptor
For left side For right side
For front side
(common to right and left sides)
For front side
(common to right and left sides)
63419-N1-20
e
1
Press the emergency stop button and open the upper door.
2
Move the squeegee head to the rear.
Hold the handle on the right of the squeegee head to move the squeegee head to an easy work
position.
3
Insert the left rear mask adaptor into the specified position.
1. Slide the left rear mask adaptor on the mask plate from the rear to fasten the mask plate with the
guide as shown below.
2. Slide the mask adaptor left at the position shown in the figure below to press-fit the lowest plate
(shaded portion shown in the figure below) of the mask adaptor into the notch of the mask plate.
Installing the mask adaptor
Mask adaptor
Notch of mask plate
Bottommost plate (gray-colored part)
Mask clamp
Mask plate
Guide
Mount knob
63420-N1-20
4-18
4
Daily operation
4
Secure the mask adaptor.
Turn the mount knob to secure the mask adaptor.
5
Raise the clamp plate.
Raise the clamp plate of the mask adaptor to attach it to the mask clamp on the machine side. Since a
magnet is provided on the adaptor, the clamp plate is kept raised.
6
Install the right rear mask adaptor.
Install it in the same manner as the left rear one.
7
Install the front mask adaptors on the right and left sides.
1.
Fit the mask adaptor from the side to fasten the mask clamp with the guide as shown in the figure
below.
2. Turn the mount knob to secure the mask adaptor.
3. Raise the clamp plate.
Guide
Mask clamp Mount knob
Installing the mask adaptor
Clamp plate
63428-N1-00
8
Install the L side (X direction) stopper.
Install the mask stopper pin at the specified position of the left mask plate while referring to the label
stating “Mask sizes and stopper positions” attached to the machine.
9
Set the mask.
Set the mask while referring to the mask installation position shown in the figure below and turn on the
mask clamp switch to secure the mask.
Mask adaptor
Mask installation position
Clamp plate
Mount knob
"550x650" mask position
"600x550" mask position
"584x584" mask position
63421-N1-00