YCP10 Users_E.pdf - 第238页
The instruction manual of this machine is written for those who operate this machine. Please read this manual carefully for correct operations and pay special attention to safety precautions. After reading through this m…
Chapter 3 Lubrication points
1. Lubrication grease and tool 3-1
1.1 Applicable grease 3-1
1.2 Grease gun 3-1
2. List of lubrication points 3-2
2.1 X-, Y-, and Z-axis 3-2
2.1.1 X1-axis and X2-axis 3-2
2.1.2 Y-axis 3-3
2.1.3 Z-axis 3-4
2.2 Printing head 3-5
2.2.1 SY-axis 3-5
2.2.2 SZ-axis 3-5
2.3 Conveyor unit 3-6
2.3.1 PU-axis 3-6
2.3.2 MX-axis 3-6
2.3.3 W-axis (Conveyor auto width adjustment) 3-7
2.4 Vision camera unit 3-8
2.4.1 CX-axis 3-8
2.5 Suction-blower unit 3-9
2.5.1 Blower hose guide 3-9
2.6 Cleaning unit 3-9
Appendix
1. Specifications A-1
1.1 Air regulator unit A-1
1.1.1 Air supply A-1
1.1.2 Edge clamp air pressure A-2
1.2 Power connection terminals A-3
1.3 Connection between machines A-4
1.3.1 PREVIOUS INTERFACE connector A-5
1.3.2 NEXT INTERFACE connector A-6
2. Inverter (suction unit) A-7
The instruction manual of this machine is written for those who operate
this machine.
Please read this manual carefully for correct operations and pay
special attention to safety precautions.
After reading through this manual, please use this manual as an
occasional reference and keep it within reach.
Introduction
Contents
1. About this manual i
2. Maintenance list ii
i
Introduction
1. About this manual
Descriptions in this manual stress important maintenance items that are essential for maintaining equipment
performance. Information given here mainly describes making inspections, cleaning and greasing as well as
procedures for replacing consumable parts in each location given in a step-by-step format. This manual is
comprised of the following chapters.
Chapter 1 Maintenance
Describes conditions and environments to use for maintaining equipment performance. The importance of making daily
checks and performing cleaning tasks is explained. Setups to make before starting maintenance work, maintenance tools
as well as the necessary tools are also described.
Chapter 2 Inspection, maintenance and adjustment
Describes inspection and maintenance that should be performed daily or periodically to use the machine safely and
avoid unnecessary trouble. Also describes methods for replacing parts subject to wear such as squeegees.
Chapter 3 Lubrication points
Indicates lubrication points and describes methods for lubricating the ball screws and guides of each axis.
w
WARNING
ALWAYS THOROUGHLY READ "SAFETY INSTRUCTIONS " STATED AT THE BEGINNING OF THIS DOCUMENT BEFORE STARTING
THE MAINTENANCE WORK.