YCP10 Users_E.pdf - 第271页
3-1 3 Lubrication points 1. Lubrication grease and tool This section describes the lubrication points of each unit as well as the lubrication inter vals and procedures. n NOTE See “Safety instructions” at the beginning o…
Chapter 3 Lubrication points
Contents
1. Lubrication grease and tool 3-1
1.1 Applicable grease 3-1
1.2 Grease gun 3-1
2. List of lubrication points 3-2
2.1 X-, Y-, and Z-axis 3-2
2.1.1 X1-axis and X2-axis 3-2
2.1.2 Y-axis 3-3
2.1.3 Z-axis 3-4
2.2 Printing head 3-5
2.2.1 SY-axis 3-5
2.2.2 SZ-axis 3-5
2.3 Conveyor unit 3-6
2.3.1 PU-axis 3-6
2.3.2 MX-axis 3-6
2.3.3 W-axis (Conveyor auto width adjustment) 3-7
2.4 Vision camera unit 3-8
2.4.1 CX-axis 3-8
2.5 Suction-blower unit 3-9
2.5.1 Blower hose guide 3-9
2.6 Cleaning unit 3-9
3-1
3
Lubrication points
1. Lubrication grease and tool
This section describes the lubrication points of each unit as well as the lubrication intervals and procedures.
n
NOTE
See “Safety instructions” at the beginning of this manual for instructions on how to handle grease.
1.1 Applicable grease
When greasing the lubrication points, be sure to use appropriate grease specified by YAMAHA as listed below.
n
Specified grease
Parts List Designation
:
GREASE PACK (NSL)
Parts No. : K48-M3856-00X
c
CAUTION
If grease other than that specified is used, this may cause damage to the machine.
1.2 Grease gun
Select an appropriate nozzle suitable for the lubrication point from three kinds of nozzles shown below and
attach it to the grease gun to apply the grease. Change the nozzle according to the greasing instructions.
Grease gun
Grease gun
30°-bent type nozzle
Standard nozzle
Change the
nozzle here.
Chuck flexible type nozzle
30°
Outside diameter
of tip: φ14
Outside diameter
of tip: φ10
Outside diameter
of tip: φ5
53301-N1-00
c
CAUTION
Prepare different nozzles by grease. If two or more kinds of grease with different characteristics are mixed in the nozzle
and it is applied, this may cause the machine performance to lower.
3-2
3
Lubrication points
2. List of lubrication points
2.1 X-, Y-, and Z-axis
2.1.1 X1-axis and X2-axis
X-axis lubrication points
X-axis guide shaft
X-axis guide
X-axis guide
X-axis guide
X-axis ball screw
Grease nipples
Grease gun:
Manual lubrication:
53302-N1-00
Lubrication point
Lubrication
location
Interval Lubrication method
1 X-axis guide 4
Monthly
Manual lubrication
2 X-axis ball screw 1 Grease gun
4 Z-axis guide shaft 1 Manual lubrication