YCP10 Users_E.pdf - 第184页

6-2 6 Managing the data 1.1.1 Backing up onto a USB flash drive F ollow the steps below to backup data to a USB flash dri ve using the Board Explorer . When using a USB flash driv e, you need to create a "board&quot…

100%1 / 288
6-1
6
Managing the data
1. Data backup
Production board data and system data can be backed up. This section explains how to make a backup of
these data.
1.1 Making a backup of board data
A backup copy of board data can be stored on a USB flash drive or on a network drive (including on-line
software). When board data is saved in YGZ format, it can be stored in any location. However, when using a
USB flash drive, the data should be stored in a predetermined location.
c
CAUTION
Use a USB flash drive (supplied with the machine or purchased from YAMAHA sales reps) specified by YAMAHA Motors
Co., Ltd. U sing a USB flash drive other than specified might cause problems. Do not use any other type of USB flash
drive with YAMAHA surface mounters and related machines.
c
CAUTION
Before operating the USB flash drive to copy data, always close the media access door to prevent dust from adhering
to the USB port and to protect the USB flash drive from electrostatic noise.
c
CAUTION
After copying board data or system data into a USB flash drive, do not leave that data in the USB flash drive for a long
time. Use the USB flash drive just as a copy medium for backup data. Prepare other backup media (CD , DVD , MO ,
etc.) to store the backup data.
6-2
6
Managing the data
1.1.1 Backing up onto a USB flash drive
Follow the steps below to backup data to a USB flash drive using the Board Explorer.
When using a USB flash drive, you need to create a "board" folder to make a directory (folder) named "No1".
Backup data should be stored there.
TIP
You may use the [Save] button to save board data to a USB flash drive.
1
Insert a USB flash drive into the USB port.
Insert a specified USB flash drive into the USB port of the machine.
The USB port can be seen when opening the panel door at the lower portion of the front of this
machine.
USB port
USB port
63601-N1-00
2
Close the media access door.
Before operating the USB flash drive, always close the media access door.
3
Check the USB flash drive connection.
Check the indicator on the lower left of the operation display.
The connection is complete when the USB flash drive icon appears red.
The connection is incomplete if the USB flash drive icon is grayed out.
Checking the USB flash drive connection
Not connectedConnected
Icon appears "red". Icon is grayed out.
64601-N1-10
4
Press the [Board Explorer] button on the [Utility] tab of the Setup screen.
The Board Explorer screen appears and shows the lists of board data stored in the machine. (The
right-hand and left-hand lists will show the same contents when the Board Explorer first opens.)
6-3
6
Managing the data
5
Press the [Media] button.
The "Media Select" screen appears.
6
Select the media and create a board folder.
1. In the "Media Select" screen, select the media (USB flash drive) and press the [Create Folder] button.
When the keyboard screen appears, enter a folder name and press the [OK] button.
Selecting the media
Select the media (USB memory device).
Enter a folder name.
64602-N1-00
2. Select the folder you have just created, and press the [Board folder making] button.
The "Board Folder Making" screen appears. Check the message and press the [Yes] button.
Making a board folder
Select the folder.
64603-N1-00