YCP10 Users_E.pdf - 第237页
Chapter 3 Lubrication points 1. Lubrication grease and tool 3-1 1.1 Applicable grease 3-1 1.2 Grease gun 3-1 2. List of lubrication points 3-2 2.1 X-, Y -, and Z-axis 3-2 2.1.1 X1-axis and X2-axis 3-2 2.1.2 Y-axis 3-3 2.…
General Contents
Introduction
1. About this manual i
2. Maintenance list ii
Chapter 1 Maintenance
1. Maintaining machine performance 1-1
1.1 Essential conditions and working environment 1-1
1.2 Importance of periodic inspections and cleaning 1-2
2. Preparing for maintenance tasks 1-3
2.1 Maintenance tools 1-3
2.1.1 Cleaning tools 1-3
2.1.2 Lubricating tools and grease 1-3
2.2 Required tools 1-4
Chapter 2 Inspection and maintenance
Before beginning work 2-1
1. Inspection and maintenance 2-2
1.1 Daily inspection 2-2
1.2 Cleaning the camera protective glass 2-3
2. Periodic maintenance items 2-4
2.1 Periodic inspection (Weekly/Monthly) 2-4
2.1.1 Parts to be replaced during periodic replacement 2-4
2.1.2 List of periodic inspection checkpoints 2-4
2.2 Parts recommended for periodic replacement 2-6
2.3 Adjusting the conveyor transfer belt tension 2-7
2.3.1 Belt Type A 2-8
2.3.2 Belt Type B 2-10
2.5 Inspecting and cleaning the air/mist filters 2-11
3. Replacing the consumable parts 2-13
3.1 Replacing the unit 2-13
3.2.1 Metal squeegee scraper 2-14
3.2.2 Urethane squeegee scraper 2-15
3.3 Suction-blower unit 2-17
3.3.1 Replacing the filter 2-17
3.3.2 Replacing the blower hose 2-18
3.4 Cleaning/replacing filter for mask vacuum chuck 2-20
3.5 Replacing the conveyor transfer belt 2-21
EMN11922
10
Chapter 3 Lubrication points
1. Lubrication grease and tool 3-1
1.1 Applicable grease 3-1
1.2 Grease gun 3-1
2. List of lubrication points 3-2
2.1 X-, Y-, and Z-axis 3-2
2.1.1 X1-axis and X2-axis 3-2
2.1.2 Y-axis 3-3
2.1.3 Z-axis 3-4
2.2 Printing head 3-5
2.2.1 SY-axis 3-5
2.2.2 SZ-axis 3-5
2.3 Conveyor unit 3-6
2.3.1 PU-axis 3-6
2.3.2 MX-axis 3-6
2.3.3 W-axis (Conveyor auto width adjustment) 3-7
2.4 Vision camera unit 3-8
2.4.1 CX-axis 3-8
2.5 Suction-blower unit 3-9
2.5.1 Blower hose guide 3-9
2.6 Cleaning unit 3-9
Appendix
1. Specifications A-1
1.1 Air regulator unit A-1
1.1.1 Air supply A-1
1.1.2 Edge clamp air pressure A-2
1.2 Power connection terminals A-3
1.3 Connection between machines A-4
1.3.1 PREVIOUS INTERFACE connector A-5
1.3.2 NEXT INTERFACE connector A-6
2. Inverter (suction unit) A-7
The instruction manual of this machine is written for those who operate
this machine.
Please read this manual carefully for correct operations and pay
special attention to safety precautions.
After reading through this manual, please use this manual as an
occasional reference and keep it within reach.
Introduction
Contents
1. About this manual i
2. Maintenance list ii