YCP10 Users_E.pdf - 第241页
iii Introduction Section Unit name Check items Daily Weekly Monthly 3 Mon. 6 Mon. Vision camera unit Mask camera Contamination on light lens Lighting status SC MX-axis Ball screw CL Guide CL Board camera Lighting status …
ii
Introduction
2. Maintenance list
n
Maintenance list
The following maintenance procedure codes are used:
S: Inspection C: Cleaning L: Lubrication E: Replacement ( ): Procedure required only when a problem exists.
n
NOTE
Example) The head, air valve, and filter items shown below are listed as C (E) items. This indicates that the filter must
be cleaned, with replacement required if it cannot be satisfactorily cleaned.
Section Unit name Check items Daily Weekly Monthly 3 Mon. 6 Mon.
Printing head
SY-axis
Ball screw CL
Guide CL
SZ-axis
Ball screw CL
Guide CL
Guide shaft
Spring
CL
Squeegee unit Scraper SC (E)
Cleaner
Cleaner unit
Condition and operation SC
Guide CL
Suction unit hose
Condition C (E)
Guide CL (E)
Filter inside suction unit Condition and operation C (E)
Conveyor unit
Edge clamp Condition and operation CL
Exit stopper Operation CL
Conveyor belt Condition and operation S (E)
Push-up plate Condition and operation S (E)
PU-axis
Ball screw CL
Guide shaft CL
W-axis timing belt Condition S (E)
W-axis conveyor auto
width adjustment
Ball screw CL
Guide CL
Hexagon spline CL
Mask vacuum
Operation S
Vacuum filter C (E)
Z-axis Z-axis
Ball screw CL
Guide shaft CL
X and Y-axis
X-axis
Ball screw CL
Guide CL
Y-axis
Ball screw CL
Guide CL
iii
Introduction
Section Unit name Check items Daily Weekly Monthly 3 Mon. 6 Mon.
Vision camera unit
Mask camera
Contamination on light
lens
Lighting status
SC
MX-axis
Ball screw CL
Guide CL
Board camera Lighting status SC
CX-axis
Ball screw CL
Guide CL
Inspection camera (OP) Lighting status SC
Others Air / Mist filter Filter C (E)
Chapter 1 Maintenance
Contents
1. Maintaining machine performance 1-1
1.1 Essential conditions and working environment 1-1
1.2 Importance of periodic inspections and cleaning 1-2
2. Preparing for maintenance tasks 1-3
2.1 Maintenance tools 1-3
2.1.1 Cleaning tools 1-3
2.1.2 Lubricating tools and grease 1-3
2.2 Required tools 1-4