3OM-1003-005.pdf - 第108页
(A04) Setup Data Fig. 3B71 Edit Window (Example) Unless "Enable" is selected for a device to be set up, the machine does not perform any setup operation on the device. (A04_01) L conveyor Set "Disable"…
(4) Specifications of Lines extended from a Pad Mark or a Through Hole
Unit: mm
Fig. 3B69
(a) A through hole or a pad mark should have only one land
which is directed in increments of 45°.
Consult our marketing department or sales agency for
details (dimensions, etc.).
(b) A copper leaf, a resist, a coating, a silk print, and a punched
hole should not exist in the range of 1.0 mm in both X and
Y directions from the outermost edges of a fiducial mark.
They may cause false recognition.
Example:
(Front Side of Machine)
Unit: mm
Fig. 3B70
(c) The shape of P.C.B. (a cutout, a punched hole) and the
external elements (light reflected from a structure, light
emitted from an external device, etc.) may sometimes in-
terfere with recognition of the fiducial marks. Consult our
marketing department or sales agency for details.
(d) A fiducial mark should make ample contrast with the sur-
roundings. (To prevent false recognition)
(e) Anything resembling a pattern similar to a fiducial mark
should not exist in the designated window. If one exists, it
may cause false recognition.
(f) A test may be required when the fiducial mark cannot be
recognized because of the extreme warpage of the P.C.B.
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
Y
X
2.3 Operation Data
0305-001 2-38 AIL01EDTP
Range of Tangent
Lines related between
Pad Mark and Land
Range of Land
Location in
Increments of 45°
for Pad Mark
Range of Land
Location in
Increments of 90°
for Pad Mark
(Front Side of Machine)
1/3 of Shorter Side
0.5 to 2.0
0.5 to 2.0
Examples of
Land Locations
Range of Land
Location for
Through Hole
(45° at the bottom
right of the hole)
0.5 to 1.5
1.0 to 2.0
Min.0.25
45°
80°
0.5 to 2.0
0.5 to 2.0
(Front Side of Machine)
(Front Side of Machine)
(Front Side of Machine)
1/3 of Shorter Side
Range of Tangent
Lines related between
Pad Mark and Land
Range of Tangent
Lines related between
Pad Mark and Land
Note
(A04) Setup Data
Fig. 3B71 Edit Window (Example)
Unless "Enable" is selected for a device to be set up, the machine does
not perform any setup operation on the device.
(A04_01) L conveyor
Set "Disable" or "Enable" in the text box.
(A04_02) R conveyor
Set "Disable" or "Enable" in the text box.
(A04_03) X/Y table chute
Set "Disable" or "Enable" in the text box.
(A04_04) Support pin up/down
Set "Disable" or "Enable" in the text box.
2.3 Operation Data
0305-001 2-39 AIL01EDTP
Disable
L conveyor
Fig. 3B72
R conveyor
Fig. 3B73
Disable
X/Y table chute
Fig. 3B74
Disable
Support pin up/down
Fig. 3B75
Disable
Note
C1005T05B0---
Component ID
Fig. 3B78
2.4 Placement Feeder Location Data
(B01) Feeder Carriage #1, #2
Each parameter must be set for the feeder carriages to be used.
Fig. 3B76 Edit Window (Example)
(B01_01) Fdr No.
Shown are the feeder Nos. in the placement feeder location data.
The numbers in ( ) indicate the feeder Nos. that will actually be loaded
with components.
Data Input Range
TCM-X110J
Feeder Carriage #1: 101 to 159
Feeder Carriage #2: 201 to 259
TCM-X300S
Feeder Carriage #1: 101 to 170
Feeder Carriage #2: 201 to 270
The numbers in ( ) indicate the feeder Nos. where the feeder No. offset in
the operation data is added.
(B01_02) Component ID
Set component IDs in the text boxes.
2.4 Placement Feeder Location Data
051 1-002 2-40 AIL01EDTP
101(101)Fdr No.
Fig. 3B77
Note