3OM-1003-005.pdf - 第318页
(1) "Camera Offset" T ab • Sheet Layout When the "Camera Offset" tab is pressed in the "Camera Offset" tab sheet, the following tab sheet appears. Fig. 3E35 "Camera Offset" T ab Sh…
3.2.6 "Camera Offset" Tab
The "Camera Offset" tab sheet is composed of the "Camera Offset",
"Individual Nozzle Camera #1 Gain/Level", and "Individual Nozzle Cam-
era #2 Gain/Level" tabs.
• Sheet Layout
When the "Camera Offset" tab is pressed in the "Device Offset" tab
sheet, the following tab sheet appears.
Fig. 3E34 "Camera Offset" Tab Sheet
• Sheet Composition
*1 "Camera Offset" Tab
When selected, the "Camera Offset" tab sheet appears.
*2 "Individual Nozzle Camera #1 Gain/Level" Tab
When selected, the "Individual Nozzle Camera #1 Gain/Level" tab
sheet appears.
*3 "Individual Nozzle Camera #2 Gain/Level" Tab
When selected, the "Individual Nozzle Camera #2 Gain/Level" tab
sheet appears.
0305-001 5-36
AIL01EDTP
*1 *2 *3
3.2 "Device Offset" Tab
(1) "Camera Offset" Tab
• Sheet Layout
When the "Camera Offset" tab is pressed in the "Camera Offset" tab
sheet, the following tab sheet appears.
Fig. 3E35 "Camera Offset" Tab Sheet (1)
Fig. 3E36 "Camera Offset" Tab Sheet (2)
0305-001 5-37
AIL01EDTP
3.2 "Device Offset" Tab
*1
*2
*3
*4
*6
*5
*7
• Sheet Composition
*1 Camera1-Camera2
X [mm], Y [mm]
This is the offset data (X and Y directions) used to correct positional
relation between the centers of Camera #1 (Component Recogni-
tion Camera (High Magnification)) and Camera #2 (Component Rec-
ognition Camera (Low Magnification)).
Shifted coordinates (deviation converted into Camera #1
scanned coordinate axis) between the center coordinates
of Camera #2 and Camera #1 are set using Camera #1
scanning coordinate system.
*2 Camera 1
Magnification X [0.01
µµ
µµ
µm/pixel], Y [0.01
µµ
µµ
µm/pixel]
These parameters are used to set magnification of Camera #1 (Com-
ponent Recognition Camera (High Magnification)) in increments of
0.01 µm per pixel.
Parameters must be entered for both X and Y directions.
Fig. 3E37 "Camera Offset" Tab Sheet (3)
3.2 "Device Offset" Tab
0305-001 5-38 AIL01EDTP
*8
*10
*9
*13
*12
*11
Note