3OM-1003-005.pdf - 第79页
(4) Repetitive Pattern (Unit P .C.B. B.B.R. Enabled) Fig. 3B5 List of Required Data T able 3B12 Pattern Program Required Data Operation Data P .C.B. Data P .E.C. Recognition Data P .E.C. Recognition Mark Data Setup Data …
(3) Repetitive Pattern
Fig. 3B4
List of Required Data Table 3B11
Pattern Program
Required Data
Operation Data P.C.B. Data
P.E.C. Recognition Data
P.E.C. Recognition Mark Data
Setup Data Note (a)
Placement Feeder Feeder Carriages #1 and #2
Location Data
Placement Data U01 Placement Data Placement Data (P Data)
(P Data) Unit Control Note (b)
Unit P.C.B. B.B.R.
Placement Data (O Data)
Placement Data Un Placement Data Placement Data (P Data)
(P Data) Unit control
Unit P.C.B. B.B.R.
Placement Data (O Data)
(a) Specify these parameters (data) for automatic adjustment
of the conveyor and chute widths, etc.
(b) Specify these parameters (data) according to the situational
changes.
Placement Coordinate Reference Point
2.1 Types of P.C.B.’s and Required Data
0305-001 2-9 AIL01EDTP
Note
(4) Repetitive Pattern (Unit P.C.B. B.B.R. Enabled)
Fig. 3B5
List of Required Data Table 3B12
Pattern Program
Required Data
Operation Data P.C.B. Data
P.E.C. Recognition Data
P.E.C. Recognition Mark Data
Setup Data Note (a)
Placement Feeder Feeder Carriages #1 and #2
Location Data
Placement Data U01 Placement Data Placement Data (P Data)
(P Data) Unit Control Note (b)
Unit P.C.B. B.B.R.
Placement Data (O Data)
Placement Data Un Placement Data Placement Data (P Data)
(P Data) Unit control
Unit P.C.B. B.B.R.
Placement Data (O Data)
(a) Specify these parameters (data) for automatic adjustment
of the conveyor and chute widths, etc.
(b) Specify these parameters (data) according to the situational
changes.
P.C.B. Recognition Mark
P.C.B. Recognition Mark
Placement Coordinate
Reference Point
2.1 Types of P.C.B.’s and Required Data
0305-001 2-10 AIL01EDTP
Note
(5) Repetitive Pattern (Unit P.C.B. B.B.R. Function Enabled)
When the machine is not equipped with the unit P.C.B. B.B.R.
function (option), this function cannot be used.
Fig. 3B6
List of Required Data Table 3B13
Pattern Program
Required Data
Operation Data P.C.B. Data
P.E.C. Recognition Data
P.E.C. Recognition Mark Data
Setup Data Note (a)
Placement Feeder Feeder Carriages #1 and #2
Location Data
Placement Data U01 Placement Data Placement Data (P Data)
(P Data) Unit Control Note (b)
Unit P.C.B. B.B.R.
Placement Data (O Data)
Placement Data Un Placement Data Placement Data (P Data)
(P Data) Unit control
Unit P.C.B. B.B.R.
Placement Data (O Data)
(a) Specify these parameters (data) for automatic adjustment
of the conveyor and chute widths, etc.
(b) Specify these parameters (data) according to the situational
changes.
Unit P.C.B. B.B.R. Detection Mark (Bad Mark)
Placement Coordinate Reference Point
2.1 Types of P.C.B.’s and Required Data
0305-001 2-11 AIL01EDTP
Note
Note