3OM-1003-005.pdf - 第182页
4.4.3 "O-data" T ab • Sheet Layout When the "O-data" tab is pressed in the "Placement Data" tab sheet, the following tab sheet appears. Fig. 3B173 "O-data" T ab Sheet • Sheet Compo…
(4) Press the [YES] button. The line (step) of the selected P-No. is trans-
ferred to the step just above the specified line (step).
Fig. 3B172
051 1-002 2-1 10
AIL01EDTP
4.4 "Placement Data" Tab
4.4.3 "O-data" Tab
• Sheet Layout
When the "O-data" tab is pressed in the "Placement Data" tab sheet,
the following tab sheet appears.
Fig. 3B173 "O-data" Tab Sheet
• Sheet Composition
Each parameter is displayed or can be entered.
Refer to "4.1.3 Basic Usage of Text Boxes" for the detailed in-
formation on how to enter each parameter.
*1 O-No.
Shown are the step Nos.
Follow the same steps as "• Operation Procedure" in "4.4.2
"P-data" Tab" on how to add or delete a step No. (O-No.).
*2 X [mm], Y [mm], Z=theta [deg], C, Comment, B-X [mm] (Option),
B-Y [mm] (Option)
*1 *2
4.4 "Placement Data" Tab
0305-001 2-111 AIL01EDTP
Note
Note
4.4 "Placement Data" Tab
0305-001 2 -112 AIL01EDTP
Fig. 3B174 "O-data" Tab Sheet
• Operation Procedure
New Creation of "O-data" Tab
(1) When the second toolbar is not visible, press the [Open 2nd.
Toolbar] icon
[ ] to make the second toolbar visible.
(2) Select the "U#" tab where an "O-data" tab should be added with
the touch screen or pointing device.
(3) When the [Add O-Data] icon
[ ] is selected, a new "O-data"
tab is added.
Deletion of "O-data" Tab
(1) When the second toolbar is not visible, press the [Open 2nd.
Toolbar] icon
[ ] to make the second toolbar visible.
(2) Select the "U#" tab where an "O-data" tab should be deleted with
the touch screen or pointing device.
(3) When the [Delete O-Data] icon
[ ] is selected, the "O-data"
tab of the selected U data is deleted.