3OM-1003-005.pdf - 第328页

051 1-002 5-47 AIL01EDTP *4 Auto feeder axis adjustment set # of picks [times], (X) adjustment [%], (Y) adjustment [%] Set the sensitivity parameters which follow up the data learned by using the statistical method in th…

• Sheet Composition

*1 Auto nozzle bypass (Auto Nozzle bypass counts) [times]

The specified number of pickup errors is used to automatically by-

pass the nozzle (to avoid using the nozzle for component picks)

where pickup error have occurred continuously during automatic

operation.

When pickup errors have occurred continuously the specified num-

ber of times, the nozzle is automatically bypassed and the informa-

tion is displayed as machine information.

(a) The data input range is "0 to 9" (times).

(b) When "0" (zero) is set, the automatic nozzle bypass

function becomes unusable.

*2 Auto nozzle bypass rate per # of picks

Error counts [times], # of picks [times]

The specified parameters are used to automatically bypass the

nozzle whose pickup rate has deteriorated during automatic opera-

tion.

When the number of picks has reached the specified value, the

parameter in the "Error counts [times]" text box is cleared.

When the number of pickup errors has reached the specified error

counts before the number of picks reaches the specified number of

picks, the nozzle is automatically bypassed and the information is

displayed as machine information.

(a) The data input range is "0 to 9999" for both "Error

Counts" and "# of Picks".

(b) When "0" (zero) is set for "# of Picks" and "Error

Counts" or the parameter in the "Error counts [times]"

text box is larger than the parameter in the "# of picks

[times]" text box, the automatic nozzle bypass func-

tion does not work.

*3 Closed loop Max counts [times]

(Not Available)

0305-001 5-46

AIL01EDTP

3.3 "Auto Operation" Tab

Note

051 1-002 5-47 AIL01EDTP

*4 Auto feeder axis adjustment set

# of picks [times], (X) adjustment [%], (Y) adjustment [%]

Set the sensitivity parameters which follow up the data learned by

using the statistical method in the feeder (B) offset data.

New "FDR. (B) OFFSET" = Old "FDR. (B) OFFSET" +

(mean of deviation obtained n times) * Coefficient

# of picks [times]

Set the total number of collected samples when data is updated

or changed.

(a) The data input range is "1 to 10".

(b) The standard value is "3".

(X) adjustment [%]

Set the feedback coefficient of the mean of the feeder axis’ X-

direction deviation.

(a) The data input range is "10 to 100%".

(b) The standard value is "50%".

(Y) adjustment [%]

Set the feedback coefficient of the mean of the feeder axis’ Y-

direction deviation.

(a) The data input range is "10 to 100%"

(b) The standard value is "50%"

3.3 "Auto Operation" Tab

Note

051 1-001 5-47-1 AIL01EDTP

Mode

"Standard", "Bias", or "Sampling Bias" can be selected.

Standard

Only the normal auto feeder axis adjustment is performed.

Bias

Compared with "Standard", it is possible to set larger follow-up

sensitivity coefficients of the first and second corrections made

after component replacement.

First Follow-Up

Mean of Deviations (Corrected Values) as Results of n-Time Component Recognitions ×

(((X)

adjustment [%] , (Y) adjustment [%]) + (Bias coefficient (X) [%], Bias coefficient (Y) [%]))

Second Follow-Up

Mean of Deviations (Corrected Values) as Results of n-Time Component Recognitions ×

(((X) adjustment [%] , (Y) adjustment [%]) + (Bias coefficient (X) [%], Bias coefficient (Y) [%])/2)

(a) As for the third and subsequent follow-ups, the de-

viations are the same as those in the standard

specifications.

(b) The result of the 1-time component recognition is

adopted only when "n" is set as "1" (n = 1).

justment [%]) + (Bias coefficient (X) [%], Bias coef-

ficient (Y) [%])" or "((X) adjustment [%] , (Y) adjust-

ment [%]) + (Bias coefficient (X) [%], Bias coeffi-

cient (Y) [%])/2" are calculated to be "more than

100%", they are regarded as "100%".

3.3 "Auto Operation" Tab

Note