3OM-1003-005.pdf - 第94页

Image Select one of the following options to determine how to capture an image of the unit P .C.B. B.B.R. detection mark (bad mark). Black (E/NR) : A black mark (E/NR) is used. White (E/R) : A white mark (E/R) is used. C…

Sample Usage of This Function

• Use this function when the adjoining pitch of components is "0.4

mm" or less.

There is an effect to prevent the interference between the compo-

nents to be placed and the already-placed components and the in-

terference between the already-placed components and the nozzles

during component placement operation.

• Use this function when small components must be placed on the

placed large ones.

• Use this function when the shielding cases, etc., must be attached

to the placed components.

(A01_17) Unit P.C.B. B.B.R. (Option)

When the machine is not equipped with the unit

P.C.B. B.B.R. function (option), this function cannot

be used.

Mode

Set one of the following options to determine whether or not the unit

P.C.B. B.B.R. detection function should be used.

Disable : The unit P.C.B. B.B.R. detection function is

disabled.

Standard : The unit P.C.B. B.B.R. detection is made at

the standard position.

Optional : The unit P.C.B. B.B.R. detection is made at

an optional position.

(a) Standard

In the P-No. 1 step of the placement data (P), set the unit

P.C.B. B.B.R. detection mark position.

Refer to "(C02) Placement Data (P-data)" for details.

(b) Optional

Refer to "(C03) Placement Data (O-data)" for details.

051 1-002 2-24

AIL01EDTP

2.3 Operation Data

DisableMode

Fig. 3B34

Note

Image

Select one of the following options to determine how to capture an

image of the unit P.C.B. B.B.R. detection mark (bad mark).

Black (E/NR) : A black mark (E/NR) is used.

White (E/R) : A white mark (E/R) is used.

Component prechuck

"Enable" or "Disable" can be selected to determine whether or not

components should be prechucked.

Disable : Components are not picked up until the unit P.C.B.

B.B.R. detection is completed.

Enable : Components are picked up before the unit P.C.B.

B.B.R. detection is completed.

Sequence

Set one of the following options when both P.C.B. recognition and

unit P.C.B. B.B.R. detection functions are used together.

Bad Mark : The unit P.C.B. B.B.R. detection function is acti-

vated before the P.C.B. recognition function. No

recognition is implemented on the unit P.C.B.

where a bad mark is put.

Recognition: The P.C.B. recognition function is activated before

the unit P.C.B. B.B.R. detection function. Positional

correction is made according to the result of the

P.C.B. recognition during movement to the bad

mark position.

0305-001 2-25

AIL01EDTP

2.3 Operation Data

EnableComponent prechuck

Fig. 3B36

Black (E/NR)

Image

Fig. 3B35

Bad Mark

Sequence

Fig. 3B37

Fig. 3B39

X (horizontal)[mm]

Y (vertical)[mm]

000.00

(A01_18) Overall P.C.B. B.B.R. (Option)

When the machine is not equipped with the unit P.C.B.

B.B.R. function (option), this function cannot be used.

Mode

Select one of the following options for the overall P.C.B. B.B.R.

function.

Disable : The overall P.C.B. B.B.R. detection function is not

used.

Enable : The overall P.C.B. B.B.R. detection function is used.

X (horizontal) [mm] and Y (vertical) [mm]

When "Enable" is selected, the coordinates (X and Y) of the bad

mark should be set for the overall P.C.B. B.B.R. detection function.

Unit: mm

051 1-002 2-26

AIL01EDTP

2.3 Operation Data

Disable

Mode

Fig. 3B38

Note