3OM-1003-005.pdf - 第329页

051 1-001 5-47-1 AIL01EDTP Mode "Standard", "Bias", or "Sampling Bias" can be selected. Standard Only the normal auto feeder axis adjustment is performed. Bias Compared with "Standard&q…

051 1-002 5-47 AIL01EDTP

*4 Auto feeder axis adjustment set

# of picks [times], (X) adjustment [%], (Y) adjustment [%]

Set the sensitivity parameters which follow up the data learned by

using the statistical method in the feeder (B) offset data.

New "FDR. (B) OFFSET" = Old "FDR. (B) OFFSET" +

(mean of deviation obtained n times) * Coefficient

# of picks [times]

Set the total number of collected samples when data is updated

or changed.

(a) The data input range is "1 to 10".

(b) The standard value is "3".

(X) adjustment [%]

Set the feedback coefficient of the mean of the feeder axis’ X-

direction deviation.

(a) The data input range is "10 to 100%".

(b) The standard value is "50%".

(Y) adjustment [%]

Set the feedback coefficient of the mean of the feeder axis’ Y-

direction deviation.

(a) The data input range is "10 to 100%"

(b) The standard value is "50%"

3.3 "Auto Operation" Tab

Note

051 1-001 5-47-1 AIL01EDTP

Mode

"Standard", "Bias", or "Sampling Bias" can be selected.

Standard

Only the normal auto feeder axis adjustment is performed.

Bias

Compared with "Standard", it is possible to set larger follow-up

sensitivity coefficients of the first and second corrections made

after component replacement.

First Follow-Up

Mean of Deviations (Corrected Values) as Results of n-Time Component Recognitions ×

(((X)

adjustment [%] , (Y) adjustment [%]) + (Bias coefficient (X) [%], Bias coefficient (Y) [%]))

Second Follow-Up

Mean of Deviations (Corrected Values) as Results of n-Time Component Recognitions ×

(((X) adjustment [%] , (Y) adjustment [%]) + (Bias coefficient (X) [%], Bias coefficient (Y) [%])/2)

(a) As for the third and subsequent follow-ups, the de-

viations are the same as those in the standard

specifications.

(b) The result of the 1-time component recognition is

adopted only when "n" is set as "1" (n = 1).

justment [%]) + (Bias coefficient (X) [%], Bias coef-

ficient (Y) [%])" or "((X) adjustment [%] , (Y) adjust-

ment [%]) + (Bias coefficient (X) [%], Bias coeffi-

cient (Y) [%])/2" are calculated to be "more than

100%", they are regarded as "100%".

3.3 "Auto Operation" Tab

Note

051 1-001 5-47-2 AIL01EDTP

3.3 "Auto Operation" Tab

Sampling Bias

Compared with "Standard", it is possible to set larger follow-up

and sensitivity coefficients of the first and second corrections

(fixed) made after component replacement.

The follow-ups can be set more sensitive than "Bias".

First Follow-Up

Deviation (Corrected Values) as Result of 1-time Component Recognition ×

(((X) adjustment [%] , (Y) adjustment [%]) + (Bias coefficient (X) [%], Bias coefficient (Y) [%]))

Second Follow-Up

Mean of Deviations (Corrected Value) as Results of 2-time Component Recognitions ×

(((X) adjustment [%] , (Y) adjustment [%]) + (Bias coefficient (X) [%], Bias coefficient (Y) [%])/2)

(a) As for the third and subsequent follow-ups, the de-

viations are the same as those in the standard

specifications.

(b) When the coefficients "((X) adjustment [%] , (Y) ad-

justment [%]) + (Bias coefficient (X) [%], Bias coef-

ficient (Y) [%])" or "((X) adjustment [%] , (Y) adjust-

ment [%]) + (Bias coefficient (X) [%], Bias coeffi-

cient (Y) [%])/2" are calculated to be "more than

100%", they are regarded as "100%".

Bias coefficient (X) [%]

Set the value of the follow-up bias coefficient (X).

Bias coefficient (Y) [%]

Set the value of the follow-up bias coefficient (Y).

Note