MV-9_Chapter 5. Teaching.pdf - 第164页
MV -9 Use r Manual 5- 164 [Figure 5- 197 band color input screen] [Figure 5- 198 band color list] T olerance Enter resistance tolerance. T olerance i gnore Important param eter for real resista nce is resist ance val…
错误!使用“开始”选项卡将 제목 2 应用于要在此处显示的文字。错误!使用“开始”选项卡将 제목 2 应用
于要在此处显示的文字。 .
5-163
Direction
Set direction of color band resistance. Direction will be based on the direction from the first
color to the last color.
Light type
Set light that is used to inspect the relevant inspection window that completed teaching. To
change light, delete all colors of color band of window that completed teaching and register
colors again at the current position.
Color band
[Figure 5-196 Color band setting screen]
Resistance value
Click < > button and input real resistance value to set color band color in color band
inspection window. resistance value can be entered by 2700, 2.7 K or others and
reference color will be displayed in resistance value entered in color band information
window. If color of real resistance and color in color band information window does not
match, click <band color input> button and input color information.
MV-9 User Manual
5-164
[Figure 5-197 band color input screen]
[Figure 5-198 band color list]
Tolerance
Enter resistance tolerance.
Tolerance ignore
Important parameter for real resistance is resistance value. If the importance of tolerance
is low, and conduct inspection after excluding tolerance.
Number of resistance color band
Set the number of resistance color band.
Body color
Enter body color of resistance. If body color of resistance is same with series of color with
color band, set this option to prevent wrong recognition of color band by body color.
Color input
[Figure 5-199 Color input setting screen]
Color Input
Window
Location Input
Window
错误!使用“开始”选项卡将 제목 2 应用于要在此处显示的文字。错误!使用“开始”选项卡将 제목 2 应用
于要在此处显示的文字。 .
5-165
Color input parameter
This is to input, add or delete color information of band that is currently selected.
Band No
Select band No.
Band size (width/height)
Judge size of area for band color inspection.
Min distance
Min distance means relative distance to target color from each reference color. This is to
distinguish normal condition during inspection.
Position input parameter
Set position of currently selected band. Click <Set> button in position input window and
position in color band area in color band resistance window to enter parameter.
2) Teaching method
① Click <resistance color band inspection window> button among operating buttons.
② Select proper light for good expression of component color band and draw window on
component as shown in [Figure5-132].
③ Set direction of color inspection window. (reference direction will be from the first color to the
last color.)
④ Enter resistance value, tolerance and number of color band in color band parameter screen.
⑤ Enter color band inspection area, size of inspection area, and inspection color in color input
parameter screen.
⑥ Draw mounting inspection window for position compensation.
[Figure 5-200 Creation of resistance color band inspection window]
White regular reflection light
Color band inspection area