MV-9_Chapter 5. Teaching.pdf - 第227页

错误 ! 使用“开始” 选项卡将 제목 2 应用于要在此处显示的文字。错误 ! 使用“开始”选项卡将 제목 2 应用于要在此处显示的文字。 . 5- 227 [Figure 5- 294 Reference module registration information] In spe ction skip If „ inspection skip ‟ in module inform ati on screen is set, …

MV-9 User Manual

5-226

[Figure 5-293 multiple module creation]

 Module delete

This function is used to delete currently selected module. base module can‟t be deleted.

 All module delete

This is a function to delete all modules excluding module No 0. If wrong multiple modules are

created, this function is useful to delete it.

 Module modify

This is used to edit Skip and items like reverse module, new creation of PCB model for

position compensation and inspection of inspection window of the relevant module.

Position compensation of inspection windows in the relevant module

 Robot will automatically move to the first compensation mark position of the relevant

module when module edit is selected, and compensation mark window will be displayed

at the center of frame image screen.

 Press the left button of mouse in frame image screen to compensate as much as twisted

position and click <OK> button in the module information screen to complete position

compensation.

 For module No „0‟ 90, 180, 270 degree rotation is possible. However, all connecting

module and new module must be deleted, and If width / height ratio of frame is wrong

during 90, 270 degree rotation, special marks such as frame compensation mark and skip

mark and fixed frame will be released. In addition, bar code position must be set again.

错误!使用“开始”选项卡将 제목 2 应用于要在此处显示的文字。错误!使用“开始”选项卡将 제목 2 应用

于要在此处显示的文字。 .

5-227

[Figure 5-294 Reference module registration information]

Inspection skip

If „inspection skip‟ in module information screen is set, inspection for the relevant module

will be skipped.

[Figure 5-295 inspection during the relevant module skip]

Reverse module

This option is used when the relevant module is 180° rotated against base module.

Skip Module

MV-9 User Manual

5-228

Starting new serial No

Same with the description of new creation of PCB model of connecting module.

 Skip mark setting

This option is used when inspection o specific module is not desired among connecting

modules. For this, display marking at certain position inside the module, and it is possible only

for base module.

Add, move, delete

Move robot to random position in a module, and click <Add> button in „inspection skip

mark‟ screen to draw window position in which marking will be displayed. For reduction of

inspection time, around compensation mark is recommended for marking position.

Light setting

Users can set light to get clearer image.

Interested area

Set inspection condition in area based on white pixel or black pixel

Parameter

If „current white ratio‟ value that changes whenever „binarization level‟ value is adjusted is

lower than „SKIP (white ratio<)‟ value, the relevant module will skip inspection.

[Figure 5-296 skip mark setting]

Move Robot to Marking Window Center