MV-9_Chapter 5. Teaching.pdf - 第195页
错误 ! 使用“开始” 选项卡将 제목 2 应用于要在此处显示的文字。 错误 ! 使用“开始”选项卡将 제목 2 应用 于要在此处显示的 文字。 . 5- 195 [Figure 5- 241 CSV file format that displays center po sition of LED p ackage measurement data]
MV-9 User Manual
5-194
Display of shift data of LED package: save shift measurement data of LED package
as a CSV file format. designate file save path in user measurement. File format will
be “MeasureData_00000005_2013-04-04_10-48-08.csv”.
Display of center position of LED package search measurement data: save center
position of LED package for comparison of data with lens inspection system on the
rear in a CSV file format. save path is fixed by D:\AOIData, and file name will be
created by bar code or inspection date and time. Set share of D:\AOIData folder so
that rear system can connect to it.
- Saving LED measurement image (Used only for measurement data verification)
For verification of BLU inspection result, save inspection image of LED package
judged as defect.
It is saved in save path of D:\LEDShiftImage in RefID (reference name) file name
during trial inspection, and folder of LEDShiftImage is automatically created in the
relevant PCB model folder during real inspection, and saved in file name of serial
No.
Use this function to save image of all LED packages that are inspected, and it will
not be automatically deleted. Hence, this function is not selected if it is not used for
verification of system measurement data.
[Figure 5-239 Setting LED measurement data]
[Figure 5-240 LED package Shift measurement data export CSV file format]
错误!使用“开始”选项卡将 제목 2 应用于要在此处显示的文字。错误!使用“开始”选项卡将 제목 2 应用
于要在此处显示的文字。 .
5-195
[Figure 5-241 CSV file format that displays center position of LED package measurement data]
MV-9 User Manual
5-196
5.4.1 Teaching of LED package with reference point
1) Teaching window
[Figure 5-242 Teaching example of LED with reference point]
[Table 5-17 Application algorithm for each LED package detection item with reference
point]
Applied algorithm
Detection
item
PKG
mounting inspection
non-mounting
damage
binary inspection-position
move
X shift
Y shift
shift
center of binary inspection-
component search
reference
point
color inspection (solder
inspection)
Polarity
solder inspection
foreign
material
Reference point
- Reference point designated by a mark. reference point differs from side view type
(hereinafter called as SV) and top view type (hereinafter called as TV) model, and x-shift
and y-shift of LED package will be measured and calculated based on this mark.