N7201A616E00_0317.pdf - 第113页

NPM-W 2 EJM7DE-MB-02O-0 0 First layer Second layer Third layer Fourth layer 2-2-2 -12 Preparatio n Head Conveyor Dispensing head (Dispe nsing head) Input addresses are displaye d in the unit of bits. Output addresse s ar…

100%1 / 714
NPM-W2 EJM7DE-MB-02O-00
First layer Second layer Third layer Fourth layer
2-2-2-11
Engineer mode 4
Compo-
nent
names
Menu configuration 6
Operating procedure
2-2-2
Production
data menu
Teach
Checks the PCB recognition
process and fixes PCB recognition
coordinates.
PCB
Feeder
Placement
Pattern attribute
Tray
Dispensing
Checks dispensing conditions for
PCB and conditions for adjusting
dispensing position misalignment.
Checks dispensing conditions
regarding dummy dispensing
(including adhesive recognition)
action and modifies the data.
Checks an image with lighting changed for
confirmation of the light condition which is
suitable for inspection.
Inspection
By changing the light value, checks
the conditions best for inspection
with watching on the screen.
Checks the component recognition
process and modifies component data.
Moves to a component pickup
position and sets the pickup offset.
Moves to a component pickup position
and sets the tray pickup position.
Checks PCB placement state and then
the conditions to correct PCB
displacement.
Checks the bad mark recognition
process and modifies the bad mark
coordinates.
Selects a target for conditional
placement on a placement point basis.
Checks the machine judgment mark
recognition process.
Checks the component recognition
process and modifies component data.
Checks the PCB warpage process and
modifies the measurement point data.
Dummy dispensing
NPM-W2 EJM7DE-MB-02O-00
First layer Second layer Third layer Fourth layer
2-2-2-12
Preparation
Head
Conveyor
Dispensing head
(Dispensing head)
Input addresses are displayed in the
unit of bits.
Output addresses are displayed in the
unit of bits.
Returns all axes to the origin.
Checks the current positions and
status of all the axes controlled by the
machine.
Checks the temperature control unit
(temperature) and Electro pneumatic
regulator (pressure).
Replaces the nozzle.
Checks the machine for normality
with the aid of head motions.
Checks the valve status and actuate
each valve on a stand-alone basis.
Adjusts the conveyor width to the
desired one.
Transfers PCBs.
Changes the lane to adjust.
(Displays only for dual lane)
Whole
Adjustment
Machine
menu
Edits measurement coordinates due
to a local height measurement
action and checks PCB conditions.
Local height
NPM-W2 EJM7DE-MB-02O-00
First layer Second layer Third layer Fourth layer
2-2-2-13
HeadCamera
Multi-
recognition
camera
Compo-
nent
names
Menu configuration 7
Operating procedure
2-2-2
Engineer mode 5
Displays multi-recognition camera
status and related information.
Machine
menu
Adjustment
Checks all recognition operations.
Displays head camera status and
related information.
Displays LED light status and related
information.
Displays the capture status of the
head camera and related information.
Configures the settings for
communication with LNB.
Whole
Configures the conditions for the
whole system operations.
Configures the indicating lamp and
buzzer settings.
Configures the indicating lamp and
buzzer settings during production or
under suspension.
Configures the monitor settings.
Setup
Tray
Checks tray unit operation.
Displays information on the feeders
installed to the machine.
Checks the motions of the feeders
installed to the machine.
Feeder