N7201A616E00_0317.pdf - 第597页

NPM-W 2 EJM7DE-MB-07 O-00 Unit adjust- ment Con v ey or width adjustment 7-2-10 ● Always r emove all PCB su pport pins b efore adjusting con veyor width. Operating procedure 7-2-10 1 2 2 1 + 1 (Manual input) (The conveyo…

100%1 / 714
NPM-W2 EJM7DE-MB-07O-00
Unit
adjust-
ment
PCB transfer check
7-2-9
You can check whether PCBs are transferred normally.
●For dual lane mode, you need to choose a lane in advance.
1
B
+
A
2
+
+
Operating procedure
7-2-9
Choose a PCB length.
(When a PCB is present on the transfer
conveyor, its position is displayed)
Choose a transfer speed.
■To unload a PCB without the request
signal from the post process
becomes enabled.
(The PCB is transferred to a selected
position)
Transfer
■To load a PCB into the machine
■To unload a PCB outside of the
machine
1
C
2
A
B
■In single lane mode
D
■In dual lane mode
C
Sensor
Displays the status of the board sensor.
D
Transfer position
Displays presence or absence of the
current board.
NPM-W2 EJM7DE-MB-07O-00
Unit
adjust-
ment
Conveyor width
adjustment
7-2-10
●Always remove all PCB support pins before adjusting conveyor width.
Operating procedure
7-2-10
1 2
2
1
+
1
(Manual input)
(The conveyor width is adjusted)
■To input production data of LNB
or the SD card
Input adjustment width
■To input manually
Touch the numerical part on the screen
to display the input screen.
When PCBs are loaded onto or removed from the conveyor, be
sure to turn OFF the servo switch
(Risk of injury due to machine movement)
DANGER
(Production data)
A
2
1
■In single lane mode
■In dual lane mode
A
Lane
Select the desired lane and adjust the
width. If both lanes are selected, both
lanes can be moved simultaneously.
System
administration
NPM-W2 EJM7DE-MB-07O-00
Unit
adjust-
ment
Head camera
information check 1
7-2-11-1
You can check the recognition process of the head camera or the status of Head camera/LED light/Capture.
A
B
Checking the recognition device
A
B
Operating procedure
7-2-11
Cursor movement/Frame
size adjustment
Choose a cursor moving
speed.
■To move the cursor
■To enlarge or reduce the frame size
■To initialize the cursor position
and the frame size
(Recognition device functions are
displayed)
(The error screen is displayed)
D
C
C
D
■[Function] screen
Ｅ