N7201A616E00_0317.pdf - 第463页

NPM-W 2 EJM7DE-MB-06O-0 0 6-2-4 -10 Setting change ● Ensure [ANS= 100] appears in the recognition res ult field. ● If ANS is 100 or less, repeat from . Confirm the recognition result 1 20 19 19 20 T o reconfirm the resul…

100%1 / 714
NPM-W2 EJM7DE-MB-06O-00
Produc-
tion data
teaching
Component recognition
teach 5
Operating procedure
6-2-4
6-2-4-9
Component recognition teach 4
17
18
+
18
Choose a recognition method
■When a component is recognized once
■When a component is recognized ten
times
■When you do not choose the
recognition method
+
17
■When a pallet component is recognized
■When all components within the range
from the selected address to the last
address are recognized
■When all components which have not been
performed teaching within the range from the
selected address to the last address are
recognized
NPM-W2 EJM7DE-MB-06O-00
6-2-4-10
Setting
change
●Ensure [ANS=100] appears in the
recognition result field.
●If ANS is 100 or less, repeat
from .
Confirm the recognition result
1
20
19
19
20
To reconfirm the result of
19
NPM-W2 EJM7DE-MB-06O-00
Produc-
tion data
teaching
Component
displacement check 1
2
3
Explains how to check nozzle height visually during placement, pickup and transcription by operating X-, Y-,
Z-axis of the placement head.
●Perform on both and .
2
1
Perform steps from through
in (P.6-2-4)
1
15
Choose a recognition
method
Operating procedure
6-2-5
6-2-5-1
4
3
4