N7201A616E00_0317.pdf - 第158页
NPM-W 2 EJM7DE-MB-02O-0 0 2-5-1 -3 Operating procedure 2-5-1 Individu- al prepara- tion R eplacing the no zzle c hanger/ dummy dispensing unit/calibr a tion jig 2 How to change the nozzle changer/ dummy dispensing unit/c…
NPM-W2 EJM7DE-MB-02O-00
OFF
SERVO
2-5-1-2
When you cannot reach the nozzle changer/dummy dispensing unit, use a stepstool.
2
3
4
5
1
Push the X-axis
inward
Detach the
feeder cart
(→[Maintenance]
P.3-2)
To
Preparation
NPM-W2 EJM7DE-MB-02O-00
2-5-1-3
Operating procedure
2-5-1
Individu-
al
prepara-
tion
Replacing the nozzle
changer/ dummy dispensing
unit/calibration jig 2
How to change the nozzle changer/dummy dispensing unit/calibration jig
The placement head is used to describe how to replace the nozzle changer while the dispensing head and
inspection head are used, respectively, for the dummy dispensing unit and calibration jig. This section
describes how to replace the nozzle changer as an example.
5
6
■For 3-nozzle head
■For light weight 16-/12-/8-nozzle head
Attach the new nozzle changer
●Slide it after aligning [▲] with [▼].
Lever
Remove the nozzle changer
2
1
1 2
Fold the lever to the left Remove the nozzle changer
NPM-W2 EJM7DE-MB-02O-00
2-5-1-4
Preparation
SERVO
ON
7
8
●Move the front/rear X-axes
and make sure they do not
interfere with the stopper.
9
Secure the nozzle changer
10
Attach the
feeder cart
(→[Maintenance]
P.3-2)
Lever
Fold the lever to the left and fix the
nozzle changer.
OK NG