N7201A616E00_0317.pdf - 第608页
NPM-W 2 EJM7DE-MB-07 O-00 Unit adjust- ment T r ay feeder action ch e ck 7-2-14 -1 A B D You can check actions of each function in a tray feeder. C 1 2 Operating procedure 7-2-14 Lifter position Pallet number on Lifter. …
NPM-W2 EJM7DE-MB-07O-00
7-2-13-4
System
administration
NPM-W2 EJM7DE-MB-07O-00
Unit
adjust-
ment
Tray feeder action
check
7-2-14-1
A
B
D
You can check actions of each function in a tray feeder.
C
1
2
Operating procedure
7-2-14
Lifter position
Pallet number on Lifter.
If the above button is pressed after
selecting the [Lifter position] or [Supply
position, [None] is shown in the
corresponding field.
Selected pallet
Selected pallet number.
●The ejection pallet is displayed as [21].
Supply position
Pallet number at Supply position.
Choose a pallet
Check action
1
A C DB
2
E
F
E
Switches between Tray A/B.
■For the twin tray feeder
■Not displayed in the case of the single
tray feeder.
NPM-W2 EJM7DE-MB-07O-00
7-2-14-2
F
Button Action
A＋
Moves a pallet to the
supply position.
Moves a pallet to the
pickup position.
Stores a pallet to the
magazine.
Draws out a pallet from
the magazine.
Replaces a magazine.
Unlocks a magazine cover.
Opens the supply shutter.
Closes the supply shutter.
Opens the magazine
shutter.
Closes the magazine
shutter.
Turns ON the lamp.
Turns OFF the lamp.
+
+
●
■To change a pallet moving speed
Choose a pallet moving
speed.
■To perform other actions
■How to view the table below (*when opening the supply shutter)
(the supply shutter)
System
administration