N7201A616E00_0317.pdf - 第316页
NPM-W 2 EJM7DE-MB-04O-0 0 4-5-2 -6 Bar code scanner- based oper a tion 4 Operating procedure 4-5-2 Defec- tive PCB process 1 1 2 + 1 Component placement check during reloading When the following confirmatio n screen appe…
NPM-W2 EJM7DE-MB-04O-00
4-5-2-5
Component
inspection
8
Put the PCB on
the reload
conveyor
Reload conveyor
Repaired
PCB
3
Read the “reload
PCB ID” set on
LNB
Reload PCB ID
Barcode
scanner
4
Read the reload
barcode
Barcode
scanner
7
Confirm the
message
『Please put the
PCB.』
Remove the
reload barcode
5
6
NPM-W2 EJM7DE-MB-04O-00
4-5-2-6
Barcode scanner-
based operation 4
Operating procedure
4-5-2
Defec-
tive PCB
process
1
1
2
+
1
Component placement check during reloading
When the following confirmation screen appears during reloading, set whether components are placed or not
and continue the production.
(Automatic operation restarts)
■To place components
■Not to place components
NPM-W2 EJM7DE-MB-04O-00
4-5-3
Component
inspection
Non-barcode scanner–
based operation
Operating procedure
4-5-3
Defec-
tive PCB
process
Only when such a communication switch as the one for bad mark recognition results is
turned OFF and inter-machine communication of information such as the one related to
bad mark recognition results is not needed, reloading operation can be performed without
having to use the barcode scanner.
■Procedure for removing a defective PCB
Remove a PCB, which has been judged as defective, as is.
Repair the PCB in an appropriate manner, and store it temporarily so as to reload it.
1
●Unloading of PCBs on the
upstream side stops and the
machine comes to an immediate
(single) stop .
●When there is any PCB(s)
already loaded into the machine,
the machine comes to an
immediate stop after the PCB(s)
is unloaded from the machine.
3
Put the PCB on
the reload
conveyor
2
Confirm the
message
Reload conveyor
Repaired
PCB
『 Please put the
PCB.』
■Procedure for reloading a defective PCB
Operate as follows.
5
Start PCB
transportation
●Turn ON the
transportation restart
switch to start
transporting a PCB on
the reload conveyor.
Start production
ENABLING
START
4