N7201A616E00_0317.pdf - 第120页
NPM-W 2 EJM7DE-MB-02 O-00 First layer Second layer Third layer Fourth layer 2-2-2 -19 Compo- nent names Menu configur a tion 10 Operating procedure 2-2-2 Machine menu Checks the connection status of plug- and-play on the…
NPM-W2 EJM7DE-MB-02O-00
First layer Second layer Third layer Fourth layer
2-2-2-18
Third step
Sets the origin offset of the head θ-
axis and the multi- recognition
camera magnification.
Measures scan position offset, multi-
recognition camera magnification and
camera tilt.
Measures the θ-axis origin offset and the
rotation center related to a head and the
offset per angle of the dispensing head .
Measures brightness of the standard
lighting.
(displayed when the dispensing head is installed)
(displayed when the inspection head is installed)
Measures position relations between
the head camera and the inspection
camera.
(displayed when the inspection head is installed)
Measures required for calculating XY
correction of an inspection range.
(displayed when the inspection head is installed)
Measures the pickup height and
position.
Measures the pickup height and
position offsets of the tray.
(tray only)
Unit
replacement
Measures the origin offset of Z-axis.
(displayed when the inspection head is installed)
Forth step
Corrects camera image distortion.
Preparation
History
Displays a history of calibrations.
Measures the transcription position
offset height.
NPM-W2 EJM7DE-MB-02O-00
First layer Second layer Third layer Fourth layer
2-2-2-19
Compo-
nent
names
Menu configuration 10
Operating procedure
2-2-2
Machine menu
Checks the connection status of plug-
and-play on the machine.
Checks the PnP history.
Updates machine system software,
messages, recognition system
software, and kernels.
Checks the system software history.
Displays special options being
enabled.
Checks system software information.
Information
PnP
Machine
Loads the common parameters
selected from LNB or the SD card.
Checks firmware information.
Updates each firmware program set
to the machine.
Firmware
Checks the firmware history.
Checks feeder information.
Updates the firmware of each feeder.
Feeder
Engineer mode 8
NPM-W2 EJM7DE-MB-02O-00
File
opera-
tion
Overview of file
operation
How to load and save
2-3-1
LNB(Line Network Box)
Loading production data(→P.2-3-3)
Loading machine parameter data
(→P.2-3-6)
Saving production
data
(→ P.2-3-4 )
Loading production data (→ P.2-3-3)
Loading machine parameter data → P.2-3-6)
Saving production data (→ P.2-3-4)
Saving machine parameter data(→ P.2-3-6)
SD
Card
Interior of the
machine
DGS
(Data Generation System)
(*another product)
NPM-W2 configuration
(Main unit + option)
Parameter disk
Operating procedure
2-3-1
Preparation
Memory